Consumer Alert - Most users do not need a license to operate this wireless
microphone system. Nevertheless, operating this microphone system without a license
is subject to certain restrictions: the system may not cause harmful interference;
it must operate at a low power level (not in excess of 50 milliwatts); and it has
no protection from interference received from any other device. Purchasers should
also be aware that the FCC is currently evaluating use of wireless microphone systems,
and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC
(TTY: 1-888-TELL-FCC) or visit the FCC�s wireless microphone website at http://www.fcc.gov/cgb/wirelessmicrophones.
Wireless receiver for guitar or microphone systems.
- Easy operation and clear, natural sound quality
Reliable performance and durable construction
Advanced dipole antenna system for extended operating range
Power, RF, and AF Peak indicators
Volume control, ¼” output jack and space-saving power supply
Available in 7 system configurations
Audio-Technica 200 Series Freeway Wireless System ATW-R250 Receiver
Audio-Technica’s Freeway 200 Series Wireless System provides proven performance in a variety of settings. Each 200 Series professional VHF wireless system includes a receiver and either a body-pack transmitter or a handheld microphone/transmitter on a specific crystal-controlled frequency. The ATW-R200 receiver design features an innovative docking power supply configuration. An AC power adapter housed in a compartment in the receiver uses an IEC-standard detachable power cord. Furthering its flexibility, the power adapter may be easily removed from the receiver case, permitting its use as a conventional in-line AC adapter. A novel dipole antenna system on the receiver improves operation by providing a ground element in addition to the usual signal element.
Each transmitter operates on a single factory-aligned, crystal-controlled frequency. This item is the T3. The frequency of each receiver appears on a label on the rear panel of the unit. Make sure you have the right one!
Order today with the no-risk assurance of our Total Satisfaction and Low Price Guarantees!
- Receiving System: Non-diversity, single-channel, dual antenna system
Image Rejection: 50 dB minimum
Signal-to-noise: Ratio 80 dB at 10 kHz deviation (IEC-weighted), maximum modulation 15 kHz
Total Harmonic Distortion: <=1% (10 kHz deviation at 1 kHz)
Sensitivity: 20 dBµV for 60 dB S/N (IEC-weighted)
Audio Output: 350 mV (1 kHz modulation, 10 kHz deviation, 100 k ohm load)
Output Connector: 1/4" TS ("mono") phone jack
Power Supply: 120V AC 60 Hz, 6 VA; or 12V DC, 200 mA, center positive, with external DC supply
Dimensions (w x h x d): 8.27" x 1.72" x 4.73"
Net Weight: 18.9 oz (536 g); without AC adapter, 11.9 oz (336 g)
Accessories Included: AD1202A 120V docking AC adapter; 120V AC IEC cordset