Behringer PMP1680S / B215XL PA Package

This special Behringer PA package has a collection of live sound equipment to get you ready for your next gig, including a Behringer PMP1680S powered mixer, 2 Behringer B215XL 15" PA speakers, 4 Nady StarPower 1 Microphones, 2 speaker stands, 4 - 20' mic cables, and 2 - 1/4" speaker cables.

Behringer EUROPOWER PMP1680S Powered Mixer
The Behringer EUROPOWER PMP1680S Powered Mixer (2 x 800W stereo, 1600W bridged mode) included in this PA system produces even more power than its predecessors while maintaining famously low weight and high efficiency. The EUROPOWER PMP1680S mixer included in this PA package employs Class-D technology including a switch-mode power supply, significantly reducing weight and heat. The 10-Channel Behringer PMP1680S boasts 8 high-quality built-in mic preamps, 24-bit FX processors, and FBQ Feedback Detection.

What is Class-D Technology?
Instead of operating relatively continuously like Class AB circuits, Class-D amps switch on and off thousands of times per second, delivering power only when needed. In other words, the amplifier is either fully on or fully off, which significantly reduces power losses from the output devices given off as heat. Less heat means the amps don't need massive heat sinks, and that makes them lighter. This no-compromise design means the Behringer EUROPOWER PMP1680S mixer will deliver full power with incredible fidelity all night long, without the need for lengthy rest cycles.

When used in conjunction with switching-mode power supplies, which don't require huge and heavy transformers, Behringer's Class-D amplifiers provide tremendous dynamic punch and superior fidelity. The resulting speaker systems are much lighter, making them easy to transport and set up.

Massive Mono or Stunning Stereo
Behringer EUROPOWER PMP1680S gives you the choice of 2 x 800-Watt stereo, 2 x 800-Watt dual mono mode (giving you a mono version of the main signal through one powered output plus a mono version of all monitor send signals through the second powered input) or 1,600-Watt bridged mono sound. Whether the center of attention happens to be a folk trio, a speech, or a synth-rock band with mind-boggling stereo patches, the EUROPOWER PMP1680S mixers can accommodate. This sonic versatility also makes it an excellent choice for churches, where vocals and stereo recordings often share face time.

Classic Control, State-of-the-Art Sound
Leave the mic preamps at home, because the quality of sound that was once only available in the studio is ready to go wherever you do. Built-in, boutique-caliber mic preamps with switchable +48V phantom power make it possible to use either dynamic or condenser mics with the EUROPOWER PMP1680S. The audio mixer gives you 8 mic inputs.

Built-in Digital Effects Processor
The EUROPOWER PMP1680S comes equipped with a 24-bit FX processor, giving you 100 mind-blowing digital effect presets such as delay, chorus, and reverb. Apply them to any channel, as well as to the monitors and main output. In case you're pulling double duty as sound engineer and performer, the FX processor features a footswitch jack for remote on/off. Of course, if you have treasured outboard gear you've grown attached to, the EUROPOWER PMP1680S can integrate them into the mix while leaving out the built-in FX processor.

Changing the Channels
The EUROPOWER PMP1680S mixer has excellent flexibility to accommodate whatever a performance requires. You get 8 channels for mics, guitars, and other mono instruments. Stereo channels 7-10 are designed to work in pairs as stereo channels, or independently for more mono instruments. All mono channels have 3-band EQ, switchable Low cut filter for eliminating infrasonics, and Clip LEDs to indicate when the input signal is too hot.

A STANDBY switch mutes all mic channels during breaks, preventing the microphones from picking up noise or interference. You can leave all faders untouched while you play a CD via the CD/TAPE inputs.

The FBQ Feedback Detection system automatically shows you which frequencies are causing feedback. Just touch the FBQ button and watch the red LEDs on the 7-band graphic EQ pinpoint show you which frequencies to adjust for optimized sound, without the feedback.

The Ins and Outs
Use the CD/TAPE IN RCA inputs to feed in external stereo signals from CD players or tape decks. The VOICE CANCELLER switch eliminates the vocals from prerecorded music for instant karaoke applications.

CD/TAPE OUT RCA outputs send line-level signals from the mixer to a recording device. The left and right output 1/4" connectors can be used for a variety of purposes, including connecting more power amps. Connect monitor power amps or active monitor speakers to the MON SOUND output. Powered outputs on this mixer are available in professional Speakon-compatible format.

Small, Simple, Superb
Medium-sized events call for a lightweight, easy-to-use powered mixer. The EUROPOWER PMP1680S mixer is one of the most efficient, affordable mixers for the job, and is even suitable for use as a pure analog mixer or as a pure power amplifiers. With new technological advantages and incredible built-in features, it's easier than ever to lend exceptional sound quality to all kinds of public performances.

B215XL 15" Passive PA Speaker
The Behringer B215XL is a 2-way passive PA speaker that boasts a whopping 1,000W power handling (peak), a 15" woofer, and a state-of-the-art 1-3/4" titanium-diaphragm compression driver. Ideal for live and playback applications, the Behringer B215XL speaker delivers deep, booming bass and acoustic power in an ultra-compact, lightweight package. This super-portable PA system provides excellent sound even at extreme levels, and the 1-3/4" compression driver allows for exceptional high-frequency reproduction.

Nady StarPower 1 Microphone
The all-purpose Nady StarPower 1 Microphone makes a great stage and recording mic. The StarPower 1 delivers clear, transparent sound across the audio spectrum. The StarPower mic's rugged construction and internal shockmounting yield reliability and low handling noise. The Nady microphone's powerful neodymium element cuts through with minimum distortion, even at high sound pressure-levels. If you're looking for real value in a microphone, the Nady StarPower 1 brings a stage-load of it.

Musician's Gear Standard Speaker Stand
This standard audio speaker stand adjusts from 42" to 71" in height and accepts 1-3/8" diameter sockets. It can hold up to 110 lb. Its aluminum construction reduces stand weight for easy transport, and its molded plastic leg housing with ergonomic knob is extremely durable.

Gear One XLR Microphone Cable
For serious-minded musicians, Gear One's XLR cables have the strength and durability to withstand more than everyday use. Since your cable is your sound, this XLR mic cable's superior wiring allows your signal to be quiet, eliminating frustrating hums, buzzing, and crackles.

Gear One Speakon to 1/4" Speaker Cable
This 16-gauge speaker cable is 25 feet in length and features a Speakon connector on one end and a 1/4" connector on the other.

Order today with the no-risk assurance of our Total Satisfaction and Low Price Guarantees!

• Behringer EUROPOWER PMP16805 Powered Mixer
  Microphone Inputs
  Type: XLR, electronically balanced input circuit
  Mic E.I.N. (20Hz-20kHz): @0O source resistance -112dB / 114dB A-weighted, @50O source resistance -112dB / 114dB A-weighted, @150O source resistance -112dB / 114dB A-weighted
  Frequency response: < 10Hz-200kHz (-1dB), < 10Hz- > 200kHz (-3dB)
  Gain: +30dB, +10dB with pad
  Max. input level: +12dBu @ +10dB gain
  Impedance approx.: 2.2kO balanced / 1.1kO unbalanced
  Signal-to-noise ratio: 110dB/114dB A-weighted (0dBu In @ +10dB gain)
  Noise (THD + N): 0.001% / 0.0007% A-weighted
  
  Mono Line Inputs
  Type: 1/4" TS connectors, balanced
  Impedance approx.: 20kO, balanced
  Max. input level: +21dBu
  
  Stereo Line Inputs
  Type: 1/4" TRS connectors, unbalanced
  Impedance: approx. 100kO, unbalanced
  Max. input level: +21dBu
  
  Equalizer
  Low: 80Hz / ±15dB
  Mid: 2.5kHz / ±15dB
  High: 12kHz / ±15dB
  
  CD/TAPE Input
  Type: RCA
  Impedance approx.: 10kO
  
  Preamp Outputs
  MAIN:
  Type: 1/4" TS connectors, unbalanced
  Impedance: approx. 150O, unbalanced
  Max. output level: +21dBu
  MONITOR:
  Type: 1/4" TS connectors, unbalanced
  Impedance: approx. 150O, unbalanced
  Max. output level: +21dBu
  
  Stereo Outputs
  Type: 1/4" TRS connectors, unbalanced
  Impedance: approx. 150O, unbalanced
  Max. input level: +21dBu
  Type: RCA
  Impedance: approx. 1kO
  Max. input level: +21dBu
  
  Loudspeaker Outputs
  Type: Twist-lock professional speaker connector
  Load impedance:
  MAIN L/R: 4 - 8O
  MONITOR/MAIN MONO: 4 - 8O
  MAIN MONO/MAIN MONO: 4 - 8O
  BRIDGE: 8 - 16O
  
  DSP
  Converter: 24-bit Delta-Sigma, 64/128-times oversampling
  Dynamic:s D/A 90dB
  Sampling rate: 40kHz
  Delay Time: max. 5 secs
  Signal run time (Line In > Line Out): approx. 1.5ms
  
  Display
  Type 2 x 2-digit, 7-segment LED
  
  Output Power
  RMS @ 1% THD, both channels driven:
  8O per channel: 300W
  4O per channel: 600W
  RMS @ 1% THD, bridged mode: 8O 1200W
  Peak Power, both channels driven:
  8O per channel: 400W
  4O per channel: 800W
  Peak Power, bridged mode: 8O 1600W
  
  Power Supply
  Mains voltage
  USA/Canada: 120V~, 60Hz
  Fuse 100: - 120 V~ T 10 A H 250V
  Fuse 220: - 240 V~ T 6.3 A H 250V
  
  Power Consumption
  Power consumption: 1050W
  Mains connector: IEC standard receptacle
  
  Dimensions/Weight
  Dimensions (HxWxD): 12-2/5" x 18-1/10" x 8-3/5", 315 mm x 460 mm x 220 mm
  Weight: 9.9 kg/21.8 lb.
  
  Behringer B215XL 15" Passive PA Speaker
  High Performance Woofer: 15" (381mm)
  Tweeter Compression Driver: 1.75" (44mm)
  Frequency Range: 55Hz to 20kHz
  Power Rating: 1000W Peak Power; 250W Continuous (IEC 60268-5)
  Impedance: 8O
  Sensitivity: 96dB (Full Space)
  Dispersion: 70° x 40°
  Crossover Frequency: 2.0kHz
  Dimensions (H x W x D): 27-1/3" x 17-1/3" x 13-1/16" (695 x 440 x 335mm)
  Weight: 38.7 lb. (17.6 kg)