Live Sound Packages

Behringer UB1202 / B215D Mains & Monitors Package

This UB1202 / B215D Mains & Monitors Package gives you an outstanding collection of live sound gear for giving you several setup options and full, musical sound. The package of audio equipment comes with a Behringer EUROPACK UB2442X mixer, 4 Behringer EUROLiVE B215D active PA speakers, 2 Behringer X8500 microphones, 6 Gear One 20-foot XLR cables, and 2 Musician's Gear standard speaker stands.

Behringer EURORACK UB1202 Mixer

This audio equipment packages includes the Behringer EURORACK UB1202, a 12-input, 2-bus mic/line mixer that boasts 4 state-of-the-art Invisible Mic Preamps (IMPs). You even get an effective, extremely musical 3-band EQ plus switchable low-cut filter on all mono channels. There is also one post-fader aux send per channel for external effects devices; main mix outputs; plus separate control room, headphone, and stereo tape outputs. Tape inputs are assignable to main mix or control room/phones outputs. The UB1202 is an extremely versatile mixer with possibilities ranging from connecting a DAT recorder and monitor speakers to running permanent video and audio installations.

Behringer EUROLIVE B215D Active PA Speaker Systems
Like its fellow EUROLIVE D Series loudspeakers, the EUROLIVE B215D PA speaker system features Behringer's special Class D amplifier technology and internal switch-mode power supply to provide a much better power-to-weight ratio than other active speakers. To put it simply, you get all the power without the backbreaking weight.

The high-efficiency design of the Behringer EUROLIVE B215D speaker system cranks out 550 of the cleanest, punchiest audio watts you've ever heard from a compact PA system. The integrated sound processor provides total system control, along with dependable protection of the LF and HF transducers, thanks to the built-in active high-pass filter, which virtually eliminate distortion—even at extreme operating levels. In addition, it features an ultra low-noise mic/line input with LEVEL control and a dedicated 2-band EQ (bass/treble) for easy control.

Intelligent by design
One of the coolest things about active loudspeakers is the lack of backbreaking racks of amps, crossovers, and EQs that are often required to make passive speaker systems sound almost as good. But that comes with a trade-off&mdash:;that extra weight is transferred to the loudspeaker, making it difficult for a single user to heave all that mass onto the top of a speaker stand.

Behringer's EUROLIVE D Series' "Intelligent Design" merges the best features of active loudspeakers with significantly lower weight by using switch-mode power supplies and Class D amplifier topology. Hidden deep inside the enclosure is the equivalent of an active two-way electronic crossover, graphic EQ, parametric EQ, mic preamp, limiter, and two Class D power amplifiers, yet the overall weight is less than a comparable loudspeaker system. These components work together seamlessly to provide optimum sound quality—and it all takes place automatically, without you having to touch a single knob.

Class D Amplifier Technology delivers high power with low weight
Instead of operating relatively continuously like Class A/B circuits, Class D amps switch on and off thousands of times per second, delivering power only when needed. In other words, the amplifier is either fully on or fully off, which significantly reduces the power losses in the output devices. This is easy in theory and complex in practice, which is why there are so many different Class D designs. Without boring you with terms like PWM Generation and Gate Drivers, let's just say that to realize the benefits of a Class D design requires compensating for a lot of potential problems that can cause audible distortion. Behringer didn't invent Class D technology, but their R&D department has been working for years to perfect their own version with all the benefits of reduced weight and cool running, yet without the drawbacks. That's why they invested over a solid year of research time eliminating pitfalls like quantizing errors and excess dead time, selecting just the right switching frequency (and other equally tech-y terms). It's also why they spent an equally long time testing individual components to ensure they will stand up to the rigors of the real world.

When combined with switching-mode power supplies that replace heavy toroid transformers, these new designs provide more dynamic punch since the higher switching frequency reloads the supply's capacitors much faster. And because they are so much more efficient, the D Series loudspeakers run cooler and don't require huge and heavy heat sinks. The resulting speaker systems are much lighter, making them easy to transport and set up. Behringer's no-compromise design means your EUROLIVE B215D active PA speaker will deliver full power and incredible fidelity all night long, with no need for rest cycles.

Instant PA system
With just a single EUROLIVE B215D speaker system and a microphone or MP3 player, you can set up an instant sound system. Thanks to the built-in preamp section, you just connect a dynamic mic and raise and lower the volume with the Level control. Plug in your sound source, place the speaker on a tabletop or stand, and power up. It's just that easy. And if you need more coverage, simply use the convenient LINK OUTPUT XLR connector to add more active loudspeakers.

Stereo music system
You can use two EUROLIVE B215D speaker enclosures for stereo playback of your MP3, CD, or old-school cassette deck without any additional hardware. Just plug the appropriate stereo breakout adapter into your deck's output jack and run the cables to the 1/4" inputs on each PA speaker. Set the Level and EQ controls the same on both enclosures, and you've got an instant party.

Marvelous monitoring
Thanks to their trapezoidal design, the D Series cabinets can be laid on their sides providing the ideal angle for onstage monitor wedge applications. Hookup is simple too, requiring only a single XLR or 1/4" cable from the monitor send on your mixing console and of course, power. Additional monitor speakers can be chained together via the XLR LINK OUTPUT jack on the rear panel.

Custom-designed transducers
The transducers (woofers and tweeters) are the only part of a sound system you actually hear, so BEHRINGER didn't cut any corners. They custom-design and build their transducers from scratch. Not only do they wind their own voice coils, they process the paper pulp into cones and even machine their own back plates. This enables BEHRINGER to control the quality and make better components, like the long-excursion LF transducers and state-of-the-art 1.35" compression drivers deployed in each EUROLIVE D Series enclosure.

Low-frequency response
The Behringer EUROLIVE D Series speakers were built with extended low-frequency handling in mind. With a tuned port, internally braced, injection-molded enclosure, each model's custom-designed LF transducer (woofer) really cranks out tight low end.

Accurate non-fatiguing midrange and treble
Even if your particular application doesn't include booming bass, you'll love the sheer accuracy of the EUROLIVE B215D. Over a year of design went into a exponential horn/aluminum dome compression driver combination that could do justice to loud hard rock or dance music—yet could also satisfy audiophiles with its musical timbre and attention to detail. For spoken word, singing, or acoustical instruments, the B215D PA speaker and every D Series speakers are able to articulate complex harmonic details.

Processor controlled output
Dynamic processing is one of the best ways to maximize output without sacrificing sound quality. The EUROLIVE B215D's built-in circuitry automatically adjusts program content, allowing the loudspeaker to operate at extreme levels. It accomplishes this by reducing bass output slightly as you approach the limit of the transducers. This frees up LF amp and transducer resources, so that higher overall volume can be realized. It's like having a tiny soundman inside each cabinet constantly monitoring and changing output parameters. By making subtle changes to the crossover frequency and the audio content, the system is able to crank out more sound&mdashwithout the slightest hint of distortion.

Massive power-to-size ratio
Cutting-edge technology and high-fidelity speakers are not all it takes to get your message across&mdashyou need power, and lots of it. At the heart of each EUROLIVE B215D speaker are two high-current amplifiers with a total output of 550 watts. They're capable of driving the speakers to their maximum with no distortion—and without speaker damage, thanks to active internal protection circuits. Simply put, this PA speaker system will astound you with its massive punch, smooth mids, and articulate top end.

Behringer XM8500
The Behringer XM8500 Microphone uses a cardioid pattern to focus on your voice while the integrated shock mount system reduces handling noise to almost nothing. Balanced low-impedance output connects to any console or microphone preamp. 50Hz to 15kHz frequency response for crystal-clear, highly detailed vocals. 2-stage pop filter minimizes breath and pop noises. Comes with rugged hard case with mic clip and stand adapter. This package comes with 4.

Musician's Gear Stand
Standard audio speaker stand adjusts from 42" to 71" in height and accepts 1-3/8" diameter sockets. Holds 110 lb. Aluminum construction reduces stand weight for easy transport. Molded plastic leg housing with ergonomic knob is extremely durable.

XLR Microphone Cable
For serious-minded musicians, Gear One's XLR cables have the strength and durability to withstand more than everyday use. Since your cable is your sound, this XLR mic cable's superior wiring allows your signal to be quiet, eliminating frustrating hums, buzzing, and crackles.

Order today with the no-risk assurance of our Total Satisfaction and Low Price Guarantees!

• B215D Microphone
  Low-frequency range:
  RMS power 280 W @ 8 Ohms
  Peak power 450 W @ 8 Ohms
  
  High-frequency range:
  RMS power 65 W @ 8 Ohms
  Peak power 100 W @ 8 Ohmns
  
  Speaker power capacity
  Woofer
  Size: 15"
  RMS @ 1% THD 250W @ 8 Ohms
  Peak power handling: 1,000W @ 8 Ohms
  
  Tweeter
  RMS @ 1% THD: 30W @ 8 Ohms
  Peak power handling: 120W @ 8 Ohms
  
  Audio inputs
  XLR(Servo-balanced)
  Sensitivity: -40dB to +4dB
  Input impedance: 20kOhms
  
  1/4" TRS jack (servo-balanced)
  Sensitivity: -40dB to +4dB
  Input impedance: 20k Ohms
  
  Level control
  Input Trim —8 to + 30dB
  Max. input level": +22dBu
  
  Link
  Connector: XLR connector
  
  Loudspeaker system data
  Frequency response: 55Hz to 20kHz
  Crossover frequency: 1.9kHz
  Sound pressure level: max. 126dB SPL @ 1m
  Limiter: Optical
  Dynamic equalizer: Processor-controlled
  
  Equalizer
  High: 12kHz/—15dB
  Low: 80Hz/—15dB
  
  Power supply:
  Voltage (Fuses):
  USA/Canada: 120V, 60Hz (T 6.3 A H 250V)
  UK/Australia: 240V~, 50Hz (T 3.15 A H 250V)
  Europe: 230V~, 50Hz (T 3.15 A H 250V)
  Japan: 100V~, 50-60Hz (T 6.3 A H 250V)
  Power consumption max.: 600W
  Mains connection: Standard IEC connector
  
  Dimensions (HxWxD) 27.2" x 17.3" x 13.2", 690mm x 440mm x 335mm
  Weight: 45.2lb./20.54kg.