Eminence Basslite C2515 15" Bass Speaker

The Eminence Basslite C2515 15" Speaker delivers the tone you want. It's recommended for bass guitar and is excellent in either sealed or vented enclosures.Eminence recommends the Basslite C2515 as a replacement speaker for the Kustom Groove 215H speaker cabinet and the Behringer Ultrabass BXL3000, Fender Rumble 100, Ampeg BA115T, and the Ampeg B200R combo amps.

Order today with the no-risk assurance of our Total Satisfaction and Low Price Guarantees!

• SpecificationsNominal Basket Diameter: 15"/381mmImpedance: 4 ohmsRMS Power Rating: 300 WattsFrequency Response: 52Hz-2.5kHzSensitivity: 98dB SPLVoice Coil Diameter: 2.5"/63.5mmNet Weight: 5.7lbs./2.6kg.Shipping Weight: 8.6 lb./3.9 kgRec. Enclosure Volume (Sealed): 1.6-2.9 cu.ft./45-82 LitersRec. Enclosure Volume (Vented): 3.0-4.2 cu.ft./85-119 LitersThiele & Small ParametersResonant Frequency (fs): 38HzDC Resistance (Re): 3.72Coil Inductance (Le): 0.39mHMechanical Q (Qms): 4.7Electromagnetic Q (Qes): 0.5Total Q (Qts): 0.45Compliance Equivalent Volume (Vas): 260 liters/9.2 cu. ft.Peak Diaphragm Displacement Volume (Vd): 381ccMechanical Compliance of Suspension (Cms): 0.26mm/NBL Product (BL): 11.1 T-MDiaphragm Mass inc. Airload (Mms): 70 gramsEfficiency Bandwidth Product (EBP): 76Maximum Linear Excursion (Xmax): 4.5mmSurface Area of Cone (Sd): 856cm2Maximum Mechanical Limit (Xlim): 8.5mm Mounting InformationRecommended Enclosure Volume: Sealed - 45-82 liters/1.6-2.9 cu.ft.; Vented - 85-119 liters/3-4.2 cu.ft.Overall Diameter: 15.32", 389.1mmBaffle Hole Diameter: 14.0", 355.6mmFront Sealing Gasket: fitted as standardRear Sealing Gasket: fitted as standardMounting Holes Diameter: 0.28", 7.0mmMounting Holes B.C.D.: 14.56", 369.9mmDepth: 6.9", 175mmNet Weight: 5.7 lb., 2.6 kgShipping Weight: 7.9 lb., 3.6 kgMaterials of ConstructionCopper voice coilPolyimide formerNeodymium magnetVented coreDie-cast aluminum basketPaper ConeCloth cone edgeSolid composition paper dust cap *Please inquire about alternative impedances.**Multiple units exceed published rating evaluated under EIA 426A noise source and test standard while in a free-air, non-temperature controlled environment.***The average output across the usable frequency range when applying 1W/1M into the nominal impedance. Ie: 2.83V/8 ohms, 4V/16 ohms.Eminence response curves are measured under the following conditions: All speakers are tested at 1w/1m using a variety of test set-ups for the appropriate impedance | LMS using 0.25" supplied microphone (software calibrated) mounted 1m from wall/baffle | 2ft. X 2ft. baffle is built into the wall with the speaker mounted flush against a steel ring for minimum diffraction | Hafler P1500 Trans-Nova amplifier | 2700 cu.ft. chamber with fiberglass on all six surfaces (three with custom-made wedges)