Eminence Basslite C2515 15in Bass Speaker

The Eminence Basslite C2515 15" Speaker delivers the tone you want. It's recommended for bass guitar and is excellent in either sealed or vented enclosures.

Eminence recommends the Basslite C2515 as a replacement speaker for the Kustom Groove 215H speaker cabinet and the Behringer Ultrabass BXL3000, Fender Rumble 100, Ampeg BA115T, and the Ampeg B200R combo amps.

Order today with the no-risk assurance of our Total Satisfaction and Low Price Guarantees!

• Specifications
  Nominal Basket Diameter: 15"/381mm
  Impedance: 4 ohms
  RMS Power Rating: 300 Watts
  Frequency Response: 52Hz-2.5kHz
  Sensitivity: 98dB SPL
  Voice Coil Diameter: 2.5"/63.5mm
  Net Weight: 5.7lbs./2.6kg.
  Shipping Weight: 8.6 lb./3.9 kg
  Rec. Enclosure Volume (Sealed): 1.6-2.9 cu.ft./45-82 Liters
  Rec. Enclosure Volume (Vented): 3.0-4.2 cu.ft./85-119 Liters
  
  
  Thiele & Small Parameters
  Resonant Frequency (fs): 38Hz
  DC Resistance (Re): 3.72
  Coil Inductance (Le): 0.39mH
  Mechanical Q (Qms): 4.7
  Electromagnetic Q (Qes): 0.5
  Total Q (Qts): 0.45
  Compliance Equivalent Volume (Vas): 260 liters/9.2 cu. ft.
  Peak Diaphragm Displacement Volume (Vd): 381cc
  Mechanical Compliance of Suspension (Cms): 0.26mm/N
  BL Product (BL): 11.1 T-M
  Diaphragm Mass inc. Airload (Mms): 70 grams
  Efficiency Bandwidth Product (EBP): 76
  Maximum Linear Excursion (Xmax): 4.5mm
  Surface Area of Cone (Sd): 856cm2
  Maximum Mechanical Limit (Xlim): 8.5mm
  
  Mounting Information
  Recommended Enclosure Volume: Sealed - 45-82 liters/1.6-2.9 cu.ft.; Vented - 85-119 liters/3-4.2 cu.ft.
  Overall Diameter: 15.32", 389.1mm
  Baffle Hole Diameter: 14.0", 355.6mm
  Front Sealing Gasket: fitted as standard
  Rear Sealing Gasket: fitted as standard
  Mounting Holes Diameter: 0.28", 7.0mm
  Mounting Holes B.C.D.: 14.56", 369.9mm
  Depth: 6.9", 175mm
  Net Weight: 5.7 lb., 2.6 kg
  Shipping Weight: 7.9 lb., 3.6 kg
  
  Materials of Construction
  Copper voice coil
  Polyimide former
  Neodymium magnet
  Vented core
  Die-cast aluminum basket
  Paper Cone
  Cloth cone edge
  Solid composition paper dust cap
  
  *Please inquire about alternative impedances.
  **Multiple units exceed published rating evaluated under EIA 426A noise source and test standard while in a free-air, non-temperature controlled environment.
  ***The average output across the usable frequency range when applying 1W/1M into the nominal impedance. Ie: 2.83V/8 ohms, 4V/16 ohms.
  Eminence response curves are measured under the following conditions: All speakers are tested at 1w/1m using a variety of test set-ups for the appropriate impedance " LMS using 0.25" supplied microphone (software calibrated) mounted 1m from wall/baffle " 2ft. X 2ft. baffle is built into the wall with the speaker mounted flush against a steel ring for minimum diffraction " Hafler P1500 Trans-Nova amplifier " 2700 cu.ft. chamber with fiberglass on all six surfaces (three with custom-made wedges)