Eminence Basslite S2010 10" 150W Bass Speaker

The Eminence Basslite S2010 10" Bass Speaker delivers the tone you want. It's recommended for bass guitar and ideal for vented 1x10", 2x10", and 4x10" enclosures.

Order today with the no-risk assurance of our Total Satisfaction and Low Price Guarantees!

• Nominal Basket Diameter: 10", 254mmNominal Impedance*: 8 ohmsPower Rating**: 150WResonance: 46HzUsable Frequency Range: 54Hz-4kHzSensitivity***: 96.2Magnet Weight: 4 oz.Gap Height: 0.28", 7.2mmVoice Coil Diameter: 2", 50.8mm Resonant Frequency (fs): 46HzDC Resistance (Re): 5.02Coil Inductance (Le): 0.47mHMechanical Q (Qms): 4.16Electromagnetic Q (Qes): 0.34Total Q (Qts): 0.31Compliance Equivalent Volume (Vas): 63.4 liters / 2.2 cu. ft.Peak Diaphragm Displacement Volume (Vd): 140ccMechanical Compliance of Suspension (Cms): 0.36mm/NBL Product (BL): 11.9 T-MDiaphragm Mass inc. Airload (Mms): 33 gramsEfficiency Bandwidth Product (EBP): 135Maximum Linear Excursion (Xmax): 4.0mmSurface Area of Cone (Sd): 350.1 cm2Maximum Mechanical Limit (Xlim): 8.0mmRecommended Enclosure Volume: Vented: 20-51 liters/ 0.7-1.8 cu.ft.Overall Diameter: 10.08", 256mmBaffle Hole Diameter: 9.05", 229.9mmFront Sealing Gasket: fitted as standardRear Sealing Gasket:Mounting Holes Diameter: 0.25", 6.4mmMounting Holes B.C.D.: 9.66", 245.4mmDepth: 4.25", 108mmNet Weight: 3.5 lbs., 1.6 kgShipping Weight: 4.6 lbs., 2.1 kgMaterials of ConstructionCopper voice coilPolyimide formerNeodymium magnetNon-vented corePressed steel basketPaper ConeCloth cone edgeSolid composition felt dust cap *Please inquire about alternative impedances.**Multiple units exceed published rating evaluated under EIA 426A noise source and test standard while in a free-air, non-temperature controlled environment.***The average output across the usable frequency range when applying 1W/1M into the nominal impedance. Ie: 2.83V/8ohms, 4V/16ohms.Eminence response curves are measured under the following conditions: All speakers are tested at 1w/1m using a variety of test set-ups for the appropriate impedance | LMS using 0.25" supplied microphone (softwarecalibrated) mounted 1m from wall/baffle | 2ft. X 2ft. baffle is built into the wall with the speaker mounted flush against a steel ring for minimum diffraction | Hafler P1500 Trans-Nova amplifier | 2700 cu.ft. chamber withfiberglass on all six surfaces (three with custom-made wedges)