Eminence Legend 1218 12" Guitar Speaker

The Eminence Legend 1218 12" Guitar Speaker delivers warm, smooth and fat American tone with a hint of smooth British break-up. Its coloration favors country, blues and jazz.Eminence recommends the Legend 1218 as a direct replacement in the Fender Twin combo Amp.

Order today with the no-risk assurance of our Total Satisfaction and Low Price Guarantees!

• Nominal Basket Diameter: 12", 304.8mmNominal Impedance: 8 ohmsPower RatingWatts: 150W:Resonance: 100HzUsable Frequency Range: 80Hz-4.2kHzSensitivity: 98.8Magnet Weight: 38 oz.Gap Height: 0.312", 7.92mmVoice Coil Diameter: 2", 50.8mmTHIELE & SMALL PARAMETERSResonant Frequency (fs): 100Hz:DC Resistance (Re): 6.95Coil Inductance (Le): 0.69mHMechanical Q (Qms): 15.51Electromagnetic Q (Qes): 0.95Total Q (Qts): 0.89Compliance Equivalent Volume (Vas): 31.2 liters / 1.1 cu. ft.Peak Diaphragm Displacement Volume (Vd): 41ccMechanical Compliance of Suspension (Cms): 0.09mm/NBL Product (BL): 11.6 T-MDiaphram Mass inc. Airload (Mms): 29 gramsEfficiency Bandwidth Product (EBP): 105Maximum Linear Excursion (Xmax): 0.8mmSurface Area of Cone (Sd): 506.7 cm2MOUNTING INFORMATIONRecommended Enclosure: VentedOverall Diameter: 12.03", 305.5mmBaffle Hole Diameter: 10.95", 278.1mmFront Sealing Gasket: fitted as standardRear Sealing Gasket: fitted as standardMounting Holes Diameter: 0.25", 6.4mmMounting Holes B.C. D.: 11.59", 294.3mmDepth: 4.5", 114mmNet Weight: 8.4 lbs., 3.8 kgShipping Weight: 10.6 lbs., 4.8 kgMATERIALS OF CONSTRUCTIONCoil Construction: Copper voice coilCoil Former: Nomex formerMagnet Composition: Ferrite magnetCore Details: Non-vented coreBasket Materials: Pressed steel basketCone Composition: Paper ConeCone Edge Composition: Paper cone edgeDustcap Composition: Zurette dust capFOOTNOTES*Please consult www.eminence.com for specifications of models with alternative impedances.** Multiple units exceed published rating evaluated under EIA 426A noise source and test standard while in a free-air, non-temperature controlled environment.*** The average output across the usable frequency range when applying 1W/1M into the nominal impedance. Ie: 2.83V/8ohms, 4V/16ohms. Eminence response curves are measured under the following conditions: All speakers are tested at 1w/1m using a variety of test set-ups for the appropriate impedance | LMS using 0.25" supplied microphone (software calibrated) mounted 1m from wall/baffle | 2ft. X 2ft. baffle is built into the wall with the speaker mounted flush against a steel ring for minimum diffraction | Hafler P1500 Trans-Nova amplifier | 2700 cu.ft. chamber with fiberglass on all six surfaces (three with custom-made wedges).**** BETA 8CX, 10CX, 12CX and ACOUSTINATOR™ CX2008 are coaxial speakers with tweeter sold separately. Published Usable Frequency response contingent upon use of APT 50 HF Driver.