Product Overview
The Lil Texas is a new member of "The Eminence Patriot Series Of Raw Frame Drivers". The Lil Texas Is a lightweight 12 inch speaker with a Texas Edge, that Features a Very Balanced Tone with Crisp Mids and Top End Bite. The Net Weight of this Speaker is 4.1 lbs and handles up to 125 Watts of Power. Recommended For Classic Rock, and Blues Country.
Product Details
Eminence Lil' Texas 12" 125W Guitar Speaker
The Eminence Lil' Texas 12" Guitar Speaker is a lightweight 12" speaker with a little Texas edge. Lil' Texas delivers a very balanced tone with crisp mids and top end bite, tight bottom end, and very American tonality. Great for classic rock, blues, and country.Eminence recommends the Lil" Texas speaker as an alternate replacement for the Eminence Tonkerlite speaker in the Rocktron Velocity S1122 and the THD Ported 2 x 12 cabinets.
Order today with the no-risk assurance of our Total Satisfaction and Low Price Guarantees!
- Nominal Basket Diameter: 12", 304.8mmNominal Impedance*: 8 ohmsPower Rating**: 125WResonance: 90HzUsable Frequency Range: 70Hz-5.5kHzSensitivity***: 101Magnet Weight: 4 oz.Gap Height: 0.28", 7.2mmVoice Coil Diameter: 2", 50.8mmThiele & Small ParametersResonant Frequency (fs): 90HzDC Resistance (Re): 7.2Coil Inductance (Le): 0.42mHMechanical Q (Qms): 11.29Electromagnetic Q (Qes): 0.69Total Q (Qts): 0.65Compliance Equivalent Volume (Vas): 43 liters / 1.53 cu. ft.Peak Diaphragm Displacement Volume (Vd): 66ccMechanical Compliance of Suspension (Cms): 0.11mm/NBL Product (BL): 12.8 T-MDiaphragm Mass inc. Airload (Mms): 28 gramsEfficiency Bandwidth Product (EBP): 130Maximum Linear Excursion (Xmax): 1.3mmMounting InformationRecommended Enclosure Volume: Sealed: Acceptable Vented: AcceptableOverall Diameter: 12.03", 305.5mmBaffle Hole Diameter: 10.95", 278.1mmFront Sealing Gasket: fitted as standardRear Sealing Gasket: fitted as standardMounting Holes Diameter: 0.25", 6.4mmMounting Holes B.C.D.: 11.59", 294.3mmDepth: 5.07", 129mmNet Weight: 4.1 lbs., 1.9 kgShipping Weight: 5.8 lbs., 2.6 kgMaterials of ConstructionCopper voice coilPolyimide formerNeodymium magnetNon-vented corePressed steel basketPaper ConePaper cone edgeZurette dust cap *Please inquire about alternative impedances.**Multiple units exceed published rating evaluated under EIA 426A noise source and test standard while in a free-air, non-temperature controlled environment.***The average output across the usable frequency range when applying 1W/1M into the nominal impedance. Ie: 2.83V/8ohms, 4V/16ohms.Eminence response curves are measured under the following conditions: All speakers are tested at 1w/1m using a variety of test set-ups for the appropriate impedance | LMS using 0.25" supplied microphone (softwarecalibrated) mounted 1m from wall/baffle | 2ft. X 2ft. baffle is built into the wall with the speaker mounted flush against a steel ring for minimum diffraction | Hafler P1500 Trans-Nova amplifier | 2700 cu.ft. chamber withfiberglass on all six surfaces (three with custom-made wedges)