Product Details
Eminence The Wizard 12" Guitar Speaker
The Eminence Wizard 12" Guitar Speaker delivers the tone you want. Paper cone, pressed steel basket. Great replacement part for sealed cabs.
Order today with the no-risk assurance of our Total Satisfaction and Low Price Guarantees!
- Nominal Basket Diameter: 12", 304.8mm
Nominal Impedance*: 8 ohms
Power Rating
Watts: 75W:
Resonance: 89Hz
Usable Frequency Range: 70Hz-5.5kHz
Sensitivity***: 103
Magnet Weight: 56 oz.
Gap Height: 0.312", 7.92mm
Voice Coil Diameter: 1.75", 44.5mm
THIELE & SMALL PARAMETERS
Resonant Frequency (fs): 89Hz:
DC Resistance (Re): 6.13
Coil Inductance (Le): 0.38mH
Mechanical Q (Qms): 11.48
Electromagnetic Q (Qes): 0.49
Total Q (Qts): 0.47
Compliance Equivalent Volume (Vas): 41.5 liters / 1.5 cu. ft.
Peak Diaphragm Displacement Volume (Vd): 42cc
Mechanical Compliance of Suspension (Cms): 0.11mm/N
BL Product (BL): 14.4 T-M
Diaphram Mass inc. Airload (Mms): 30 grams
Efficiency Bandwidth Product (EBP): 181
Maximum Linear Excursion (Xmax): 0.8mm
Surface Area of Cone (Sd): 519.5 cm2
MOUNTING INFORMATION
Recommended Enclosure
Sealed: Acceptable
Vented
Overall Diameter: 12.02", 305.3mm
Baffle Hole Diameter: 10.97", 278.6mm
Front Sealing Gasket: fitted as standard
Rear Sealing Gasket: fitted as standard
Mounting Holes Diameter: 0.25", 6.4mm
Mounting Holes B.C. D.: 11.63", 295.4mm
Depth: 5.2", 132mm
Net Weight: 10.8 lbs., 4.9 kg
Shipping Weight: 12.5 lbs., 5.7 kg
MATERIALS OF CONSTRUCTION
Coil Construction: Copper voice coil
Coil Former: Nomex former
Magnet Composition: Ferrite magnet
Core Details: Non-vented core
Basket Materials: Pressed steel basket
Cone Composition: Paper Cone
Cone Edge Composition: Paper cone edge
Dustcap Composition: Zurette dust cap
FOOTNOTES
*: Please consult www.eminence.com for specifications of models with alternative impedances.
**: Multiple units exceed published rating evaluated under EIA 426A noise source and test standard while in a free-air, non-temperature controlled environment.
***: The average output across the usable frequency range when applying 1W/1M into the nominal impedance. Ie: 2.83V/8ohms, 4V/16ohms. Eminence response curves are measured under the following conditions: All speakers are tested at 1w/1m using a variety of test set-ups for the appropriate impedance " LMS using 0.25" supplied microphone (software calibrated) mounted 1m from wall/baffle " 2ft. X 2ft. baffle is built into the wall with the speaker mounted flush against a steel ring for minimum diffraction " Hafler P1500 Trans-Nova amplifier " 2700 cu.ft. chamber with fiberglass on all six surfaces (three with custom-made wedges).
****: BETA 8CX, 10CX, 12CX and ACOUSTINATORâ„¢ CX2008 are coaxial speakers with tweeter sold separately. Published Usable Frequency response contingent upon use of APT 50 HF Driver.