Affordable portable sound system with subwoofer.
- Small size, big sound
Lightweight and portable
Full range response
Harbinger Compact Portable PA System
The Harbinger HA300 delivers big sound in a medium package at a small price. It is a full range system that features a subwoofer, a vertical array of four inch speakers and a piezo tweeter, power to run them all and a capable mixer. It is a complete sound reinforcement solution that is apropriate to venue installation, bands, DJs and any application that requires clear, loud sound reinforcement.
The mixer features two channels with balanced XLR and balanced 1/4" line inputs, each with discreet volume control and two band EQ. A third channel accepts a stereo 1/8" input, volume control and two bands of EQ as well. A master volume controls overall system volume, and a linking panel features an XLR input and an XLR output. All of this mixing capability is built-in to the HA300T top speaker.
The HA300T contains a 100W power amp and the subwoofer (HA300S)contains a 200W power amp. The top speaker has a 1/4" subwoofer output that is crossed over at 150Hz so the power amp in the top doesn't need to process the low frequencies at all. If you want, you can use just the top and when the subwoofer out is not engaged, the speaker processes the full range signal.
The HA300T features four 4 1/2" drivers and a 3 1/2" piezo driver. The HA300S features a 12" 200W 8 ohm speaker in a ported cabinet. The linking system makes it ideal for hooking two systems together.
Order today with the no-risk assurance of our Total Satisfaction and Low Price Guarantees!
- HA300T (top)
Output Power: 100W 4 Ohm load, Internal
Inputs: CH 1 and 2 - Mic XLR balanced, line level ¼” unbalanced
CH3 - 1/8” Headphone/line Level Stereo, mixed mono
Frequency Response: 20HZ-20kHz
Channel EQ: (HIGH, LOW) 4kHz and above, 800Hz and below
LINK IN & LINK OUT: Both jacks accept a balanced input and send pre-master output
Subwoofer Out: Line Out 20Hz-150Hz
Power Requirements: USA/Canada 120VAC/60Hz, 160W nominal
Speakers: Four 4½” drivers 50W 4 Ohm each
Horn: 3½” piezo driver
Power Capacity: 100W RMS
Frequency Response: 60HZ-20kHz, Full range (subwoofer jack not used)
150HZ-20kHz, Crossover Active (¼” mono plug in subwoofer jack)
Nominal Impedance: 4 Ohms, Internal Not designed for external speakers
Weight: 23.3 lb.
Dimensions (W x H x D): 7½", 28", 6½"
Output Power: 200W 8 Ohm load, Internal
Accepted Inputs: Line Level ¼” Unbalanced
Frequency Response: 35Hz -150Hz System response with built-in crossover
Power Requirements: USA/Canada 120VAC/60Hz, 400W maximum
Speaker: 12” 200W 8 Ohm
Weight: 47.5 lb.
Dimensions (W x H x D): 17 ¾" x 14" x 21 5/8"