Powered PA Speakers

JBL EON 510/518 & DBX Driverack Bundle

This package includes a JBL EON518S 18" subwoofer, a pair of JBL EON510 10" Powered PA speakers, and a dbx DriveRack PX Powered Speaker Optimizer. The portable speakers and subwoofer alone would provide you with excellent sound, but adding the incredible technology of the dbx DriveRack PX Powered Speaker Optimizer to the mix means you're going to get even better tone without any feedback.

dbx DriveRack PX Powered Speaker Optimizer
Powered speakers are beautiful things. Everything you need bundled into simple, tidy, portable packages. Just grab 'em and go, right? Well, you may think your powered speaker system is complete, but you're missing half the picture. DriveRack PX is the other half. With the PX, dbx has created a processor specifically tailored for powered speakers.

Utilizing dbx's highly acclaimed DriveRack technology, the PX picks up where your powered speakers leave off. The DriveRack PX Powered Speaker Optimizer has everything you need to get the most out of your stereo powered speaker system. It even includes stereo or mono subwoofer support. With the included dbx M2 measurement mic, Auto-EQ corrects for audible deficiencies in the room environment. Dbx's patented Advanced Feedback Suppression (AFSTM) kills nasty feedback, allowing problem-free operation at higher sound levels, while dbx's patented Subharmonic Synthesizer extends bass response for enhanced bottom end.

With all that, you also get classic dbx compression and the protection offered by dbx's graceful PeakStopPlus limiting. Your ears, your audience, and your powered speakers will forever thank you. In spite of all that sophistication, rest assured dbx won't overcomplicate the simplicity of your rig. Dbx's exclusive Setup, Auto-EQ, AFS Wizards, and out-of-the-box support for a host of JBL and other popular powered speakers, make setup a snap. Louder, cleaner, better sound than you thought possible from your powered speakers.

JBL EON518S 18" Subwoofer
The JBL EON518S is an 18", direct-radiating, high performance powered compact subwoofer speaker system designed to extend low frequency performance of any EON system. The JBL subwoofer also offers the convenience of an integrated crossover and stereo loop-thru capability. The EON518S is comprised of a 460 mm (18") Differential Drive woofer driven by a 500W Class-D digital amplifier. The amplifier input panel offers stereo or mono line level inputs via balanced XLR connectors as well as a single channel speaker level input via a 1/4 inch TS phone jack. Signal processing, crossover functionality and limiting for the system is integrated into the input section functionality. Overall subwoofer input sensitivity is controlled by a single easy-grip knob and a simple switch enables polarity reversal for sub/satellite system optimization. It's signal present and limit lights indicate performance status and JBL provides an additional switch to kill the illuminated logo in theater applications. The speaker enclosure has been engineered for maximum performance and absolute minimum size. Constructed of 18 mm plywood it is coated in JBL's rugged DuraFlex finish. It also features a full screen-backed steel grille designed into a rugged copolymer bezel for maximum component protection. For comfortable portability the EON518S subwoofer features 2 large ergonomic rubber grip handles.

2 JBL EON510 10" Powered PA Speakers
The JBL EON510 is a 10", 2-way, powered portable speaker system is capable of reproducing full-bandwidth sound at high levels, offering the additional utility of a 3-channel built-in mixer. The EON510 is comprised of a 10" Differential Drive woofer, a 1" neodymium high-frequency compression driver coupled to a 100° H by 60° V waveguide. Both components are driven by the discrete channels of a 280-watt Class D integrated power amplifier. The PA speaker's input section contains all crossover functions, protection, and mixer functionality.

Order today with the no-risk assurance of our Total Satisfaction and Low Price Guarantees!

• dbx DriveRack PX Powered Speaker Optimizer
  Analog Inputs
  Number of Inputs: 2 (Stereo) Line inputs
  1 RTA Mic input
  Connectors: 2 Female XLR line inputs
  1 XLR RTA Mic input
  Type: Electronically balanced, RF filtered
  Impedance: >40k_
  Max Input Line level: +20dBu
  Input CMRR: >45dB
  RTA Mic Phantom Voltage: +15VDC
  RTA Mic EIN: <-110dBu, 22Hz-22kHz, 150_
  
  Analog Outputs
  Number of Outputs: 2 (Stereo) Line outputs
  2 Sub outputs (mono or stereo)
  Connectors: 2 Male XLR XLR line outputs
  2 Male XLR Sub outputs
  Type: Electronically balanced, RF filtered
  Impedance: 120 _
  Max Output Level: +20dBu
  
  A/D Performance
  Type: dbx Type IVTM conversion system
  Dynamic Range: 110dB A-weighted, 107dB unweighted
  Type IV dynamic range: 123dB with transient material, A-weighted, 22kHz BW
  121dB with transient material, unweighted, 22kHz BW
  115dB typical with program material, A-weighted, 22kHz BW
  Sample Rate: 48kHz
  
  D/A Performance
  Dynamic Range: 112dB A-weighted, 110dB unweighted
  
  System Performance
  Dynamic Range: 110dB A-unweighted, 107dB unweighted
  THD+N: 0.002% typical at +4dBu, 1kHz, 0dB input gain
  Frequency Response: 20Hz — 20kHz, +/- 0.5dB
  Interchannel Crosstalk: <-110dB, 120dB typical
  Crosstalk input to output: <-100dB
  
  JBL EON518S 18" Subwoofer
  System Type: Self-powered 18", bass-reflex design
  Frequency Range (-10 dB): 36 Hz – 130 Hz
  Frequency Response (±3 dB): 42 Hz – 100 Hz
  Crossover Frequency: 120 Hz (HPF selectable on outputs)
  System Power Rating: 500 W continuous, 1000 W peak
  Distortion: Less than 0.1% at rated power
  Maximum SPL: 129 dB
  Signal indicators: Limit: Red LED indicates input overload condition
  Signal: Green LED indicates signal present
  Input Gain: - Infinity to +4 dBu
  Input Impedance: Nominal 20kOhms (balanced)
  Polarity: 0° or 180° phase shift
  LF Driver: 1 x JBL 268G 460 mm (18") Differential Drive integrated woofer with dual voice coils, 4 ohm impedance
  Enclosure: 18 mm, plywood
  Suspension / Mounting: 36 mm pole socket on top
  Finish: DuraFlex
  Grille: Powder coated perforated steel with acoustically transparent black screen backing.
  Input Connectors: Balanced XLRs with loop through (stereo) to balanced XLR satellite outputs. 1/4" Speaker level input.
  XLR Pin Assignments: Pin 2 (+), Pin 3 (-), Pin 1 (GND)
  AC input: 120 – 230 V, 50/60 Hz
  Dimensions (H x W x D): 24.3" x 22.4" x 25.7"
  Net Weight: 65lb.
  
  2 JBL EON510 10" Powered PA Speakers
  System Power Rating: 280W continuous
  560W peak
  Frequency Range (-10 dB): 58 Hz - 18.5 kHz (EQ in Flat position)
  Dimensions: 12-3/10" W x 19-3/10" H x 10-3/10" D
  Frequency Response (±3 dB): 70 Hz - 17 kHz (EQ in Flat position)
  Coverage Pattern: 100° H x 60° V nominal
  Maximum SPL: 121dB
  Net weight: 17 lb.