Mackie ProFX12 / SRM450 V2 PA Package

The Mackie ProFX12 / SRM450v2 PA Package includes the Mackie ProFX12 Professional Compact Mixer with 6 mono/4 stereo channels and effects; 2 x Mackie SRM450v2 12" PA Speakers; 2 Audio-Technica M4000s dynamic mics; and 4 mic cables.

Mackie ProFX12 Professional Compact Mixer
The ProFX12 is the perfect choice for smaller performing acts, solo performers or for small venues that don't have the budget or space for a ton of outboard gear. The ProFX12 has everything needed to make your gig sound great and is really easy to operate. Plus, USB I/O lets you record the show or stream music straight from a laptop. The "Pro" in ProFX stands for Pro. Professional tools, rugged build quality, small footprint…everything you need.

The ProFX12 is loaded with six Mackie high-headroom, low-noise mic preamps, 3-band EQ, a built-in DI for direct connection of a guitar or bass, integrated "Gig-Ready" effects, precision 7-band GEQ and more. The ProFX12 has all the right tools, each and every one designed to sound great. Plus, everything is housed in an ultra-tough enclosure with additional impact-resistant sidecheeks, protecting your investment from the rigors of the road.

"Gig-Ready" RMFXEffects

The RMFX(Running Man FX) 32-bit effects processor brings "Gig Ready," useable effects to your mixes. Why scroll through hundreds of bizarre effects, like "ghost ambience?" Yeah, like anyone even knows what that means. Or how about winners like "delay+phaser2", which you'll never use in a million years. Those other mixers will leave your fingers raw from all the scrolling you have to do. The RMFXprocessor features 16 solid FX that are known for their utility and usability. Small, medium and large room reverbs with a mix of warm and bright characteristics puts your mix in the right space. Simple, rich choruses and an array of practical delays enable you to create professional mixes without requiring a two-hour sound check. Basically, Mackie has delivered the choicest parts of a full rack of gear, right at your fingertips, that is easy to master, allowing you to look and sound really good at your next gig. Really, really good.

Record and Stream via USB

With all the right tools for the job, the ProFX12 allows you to create memorable mixes, but even with all those features, portability is paramount and you can't be burdened with lugging around additional equipment. No worries, integrated USB I/O takes the pain out of recording. Just connect the ProFX12 to a laptop, start up your included copy of Tracktion 3 Music Production Software (or almost any DAW software out there) and you can record the whole mix. You can even stream music from your laptop during breaks. Once you get home, record more tracks or use the ProFX12 to playback some tunes during your next party. Unless you're anti-social, don't have the right kind of place for a party or are just sick of buying food and beverages for everyone. In that case, you can play back whatever talk-radio show you listen to when alone.

Not only that, the innovative "USB Thru" switch allows for an impressive live/recording setup when using performance software like Ableton Live or Reason. When gigging, stream the output of your performance software (or iTunes, for that matter) into the ProFX12. Combine that signal with anything plugged into the mixer, and send the whole thing back to the computer for recording. Archiving your integrated live performances has never been easier!

Legendary Mackie Durability

Mackie is known for building mixers that are "Built-Like-A-Tank", and the ProFX12 is no exception. All of its tender bits are securely encased in a solid steel chassis. No only that, the impact-resistant sidecheeks are made of ultra-tough ABS, adding extra protection where it is most likely to fall…not that you drop things.

Tracktion 3 Music Production Software

The included Tracktion 3 Music Production Software doesn’t make you bounce around endless menus and windows to make music. Based on a simple, single-screen interface, the award-winning Tracktion 3 is a fast, powerful, and complete solution for turning your ideas into finished songs. It comes a plethora of power and plug-ins to keep your music flowing—not locked in menus or limitations.

Mackie SRM450v2 PA Speaker
Live sound sometimes seems like a wild, uncaged animal—very hard to control. With the SRM Series Portable Active Loudspeakers, Mackie has come up with the technology to help tame the beast, so you could focus on your performance, instead of being distracted by constant EQ and level tweaks. With the SRM450v2, live sound is whipped completely into submission, giving you more control over your shows than ever. Thanks to its all-new design—from adding new amps and transducers to a new lightweight power supply—the SRM450v2 surpasses the performance of the original SRM450 to deliver pure studio monitor sound at more powerful, full-on loudspeaker levels. With the SRM450v2, live never sounded so good…or behaved so well.

Ultra-Wide Dispersion < Br>
When the SRM450v2 loudspeakers are on stage, no matter where you stand, you hear sound with impeccable stereo imaging, depth of field and definition—at full-on loudspeaker levels. which is achieved through its multi-cell horn throat aperture.

Stunning Bass via Servo Feedback Controlled, all new Neodymium Woofer < Br>
Many portable loudspeakers produce lows that lack substance—they just don’t have it in ‘em to give you that chest-pounding punch. But the SRM450v2 delivers astonishingly deep and defined bass frequencies. In fact, it outperforms the original SRM450, which was renowned for its ability to deliver real low-down sound. That’s thanks to the SRM450v2’s servo feedback technology combined with its all-new neodymium woofer and 3-inch voice coil.

Based on Mackie's award-winning HR824mk2 studio monitor technology, the servo feedback damping electronic circuit within the SRM450v2 “locks” the woofer in place with the positive and negative outputs of the amplifier. This creates a solid direct-coupling that allows the SRM450v2 to deliver extremely deep bass from a small cabinet. And the new neodymium woofer’s magnet is lighter in mass, therefore faster than ceramics, giving the SRM450v2’s bass more punch. The new longer 3-inch voice coil allows the woofer to handle heat more efficiently, so it produces a consistently full dynamic range—even at maximum output. So you get full, thumping, detailed lows, even after long hours of use at near-peak volumes.

Super low distortion < Br>
Thanks to Mackie's own Class-D, Fast Recovery Amplification with its combination of Class D topology and Fast Recovery circuitry, the SRM450v2 operates with incredible efficiency, and delivers much more power and clarity. With this "Class D Fast Recovery amplification," the SRM450v2 handles maximum volume—and associated heat—with ease, so there's no unwanted noise, and no thermal problems. Even after hours of sustained use at near-peak levels, your sound remains clean and your SRM450v2 keeps cool.

Legendary Active Electronics < Br>
In a passive loudspeaker setup, an external amplifier is connected to a passive crossover inside the speaker, which distributes frequencies to the transducers. Because power amps and transducers vary widely in sound and quality, trying to match the right power amp with the right speaker can be challenging, especially if you're not a professional acoustic technician—or rolling in cash so you can hire one. Mackie's proven Active design does all the work for you. With the SRM450v2, you get a complete loudspeaker system, with complex electronics and carefully chosen components, all precisely tuned and tweaked to work together. The result is a loudspeaker with phenomenal sound quality and power, that's completely plug-and-play—no EQ needed.

Built-in Protection Circuitry for Long Life< Br>
Mackie knows their Active loudspeakers are pushed hard—often to, or beyond, the limit. That's why Mackie has reliable protection circuitry built in to every one. The SRM450v2 employs a built-in limiter for less distortion at peak levels. And thanks to the advanced technology of its power supply and Class-D amp topology, the SRM450v2 is greater than 90 percent efficient—more of the power from your outlet goes straight to the transducer, without the power supply and amp giving off loads of heat. Less heat means better performance, and longer life.

Versatile, Portable, Tough—And They Look Good, Too< Br>
When designing the SRM450v2, Mackie considered every angle. From every angle is just how you can position it, too—pole-mount it from the bottom, fly it vertically or horizontally via itsoptional hanging bracket, or use it as a wedge monitor. With all this flexibility, it's the most versatile portable Active loudspeaker around. And now moving it into place is easier than ever. Weighing in at just 26 pounds—now that's light!—you'll have more than enough strength left over to deliver an electrifying performance after loading in. Plus, the SRM450v2 retains its rugged, Mackie "built-like-a-tank" durability, thanks to the polypropylene cabinet—now in a tasty hue of Midnight Blue. So not only do you get a portable loudspeaker that sounds phenomenal, you get one that's tough and portable for the road, and handsome enough for the show.

Audio-Technica M4000s Dynamic Microphone
The handheld Audio-Technica M4000S dynamic microphone combines professional features with a ridiculously affordable price tag. Audio-Technica tailors the M4000S mic's frequency response for crystal-clear vocal reproduction. Great feedback rejection and focused pickup are due to the A-T microphone's unidirectional polar pattern. The M4000S Audio-Technica mic also is equipped with a handy On/Off switch for convenience.

Audio-Technica professional microphone enhancements include a balanced XLR output, and a mic clip. Whether you're on the road, in the studio, or just performing at local gigs. Expect the all-metal Audio-Technica M4000S microphone to provide you with years of trouble-free use.

Order today with the no-risk assurance of our Total Satisfaction and Low Price Guarantees!

• Mackie ProFX12 Professional Compact Mixer
  Acoustic performance
  EIN: -125 dBu
  Distortion: 20 Hz – 20 kHz THC+N SMPTE IMD: <0.03% @ +4 dBu output
  Common mode rejection ratio: 1 kHz
  Frequency response: 20 Hz – 30 kHz +0 dB/-1dB
  Crosstalk: 20 Hz – 20 kHz: -90 dB @ 1 kHz, fader off -75 dB @ 1 kHz
  Phantom power: 48 VDC
  
  Channel EQ
  Low cut: 100 Hz, -18dB/octave
  High shelving: ±15dB @ 12kHz
  Mid shelving: ±15dB @ 2.5kHz
  Low shelving: ±15dB @ 80kHz
  
  Digital effects
  I/O: mono input/stereo output
  Number of presets: 16
  
  7-band graphic EQ
  Frequency centers: 125, 250, 500, 1k, 2k, 4k, 8k
  Gain: +15 dB
  
  USB
  Format: 1.1
  I/O Stereo/stereo output
  A/D/A: 16 bit, 44.1 kHz/48kHz
  
  Tracktion 3 Music Production Software
  System Requirements (/em):
  For the PC:
  Microsoft Windows 7 32 / 64, Vista 32 / 64 RTM or XP SP 2
  Pentium 4, Celeron, or Athlon XP processor
  512 MB RAM
  
  For the Mac:
  Mac OS X 10.4.11 – 10.6.4
  G4 processor
  512 MB RAM
  
  Mackie SRM450v2 PA Speaker
  Acoustic Performance
  Frequency Response (-3 dB): 55Hz-18kHz
  Frequency Range (-10 dB): 45Hz-20kHz
  Maximum SPL Long-Term: 124dB SPL @ 1m
  Maximum SPL Peak: 127dB SPL @ 1m
  Crossover point: Linkwitz-Riley, 24 dB/octave @1600 Hz
  
  Input/Output
  Input/thru: balanced differential
  Input Impedance: 20kO
  
  Sensitivity
  Line: +4 (center detent)
  Mic: -36 dBu
  Miximum input level: +22 dBu
  Acoustic contour Equalization (peaking):
  +3 dB @ 100 Hz, +3 dB @ 12 kHz,
  
  Low Frequency Power Amplifier
  Rated Power: 300 watts RMS
  THD: <0.1%
  Design: Class D, parametric Servo Feedback
  
  High Frequency Power Amplifier
  Rated Power: 100 watts
  THD: <0.1 %
  Design: Class AB
  
  *Rated power is continuous RMS wattage into tranducer's rate impedeance @ 1kHz for the HF amplifier and @ 100Hz for the LF amplifier
  
  Transducers
  Low Frequency:
  Size: 12"/300mm diameter;
  Voice coil: 3.0"/75mm
  Magnet: Neodymium
  Sensitivity: 98dB
  Nominal impedance: 8 Ohms
  Power handling: 600 watts, program
  Frequency range: 45 Hz – 3 kHz
  
  High Frequency
  Diaphragm diameter: 1.75"/44.5mm
  Material: heat treated titanium
  Sensitivity: 106dB
  Nominal impedance: 8 Ohms
  Power handling: 100 watts, program
  Frequency range: 1kHz – 20 kHz
  
  Horn design
  Type: conical and exponential
  Mouth size: 12" / 304.8mm (W) x 7" / 177.8mm (H)
  Throat diameter: 1" 25.4mm
  Horizontal coverage: 90° (1 kHz – 20kHz)
  Vertical coverage: 45° (2.8 kHz – 20 kHz)
  
  AC Power Requirements
  US, JP: 120 VAC, 60Hz
  EU, UK AU, CN: 230 VAC, 50Hz
  Japan: 100 VAC, 50/60Hz
  AC Connector: 3-pin IEC 250 VAC
  
  Control system function
  Electronic crossover, phaze alignment, equalization, parametric EQ
  
  Safety features:
  Low frequency dynamic bass protection; power supply; amplifier thermal protection
  
  Construction Features
  Basic Design: Asymmetrical Trapezoidal
  Enclosure alignment: six-order
  Material: Polypropylene
  Finish: Black Textured
  Handles: One on each side, one on top
  
  Mounting methods
  integrated mounting points, M10
  Two each located on each side, top, bottom, and rear of enclosure
  
  Grille: Perforated metal with weather-resistant coating
  Display LEDs: signal present, power ON, and Thermal
  
  Physical properties
  Height: 26"/660mm
  Width: 15.4"/390mm
  Depth: 14.8"/376mm
  Weight: 40lb./18kg
  
  Audio-Technica M4000s Dynamic Microphone
  Element: Moving coil dynamic
  Polar pattern: Unidirectional
  Frequency response: 70Hz — 12.000Hz
  Open circuit sensitivity: -52dB (2.5 mV)
  Impedance: 500 Ohms
  Switch: On/off
  Weight: 329 grams (11.6 oz.)
  Dimensions: 178.3mm (7.02") length, 56.3mm (2.22") body diameter
  Output Connector: Integral 3-pin XLR M-type
  Accessories: Slip-in stand clamp for 5/8" — 27 threaded adaptor