Shure MX202 MicroFlex Condenser Microphone with Inline Preamp

The MX202 Microflex condenser microphone captures Shure quality sound in a compact, adjustable package. The MX202 features a condenser microphone cartridge attached to a flexible, 4" gooseneck with a 30' cable. The inline preamp offers easy microphone stand or ceiling installation, and when combined with the high sensitivity cartridge's wide frequency response, this microphone provides accurate sound reproduction with a minimum of RF interference or electromagnetic hum. Includes mic stand adapter.

Also available with a plate-mounted preamp (see product # 270396).
Requires phantom power.

Order today with the no-risk assurance of our Total Satisfaction and Low Price Guarantees!

• Frequency Response
  50 to 17,000 Hz
  
  Output Impedance
  180 ohms actual (EIA rated at 150 ohms)
  
  Sensitivity (At 1,000 Hz, open circuit voltage*)
  Cardioid: -35.0 dBV/Pa (17.8 mV)
  Supercardioid: -33.5 dBV/Pa (21.1 mV)
  All values -12 dB at 0 gain; *1 Pascal = 94 dB SPL
  
  Maximum SPL (1 kHz at 1% THD, 1 k ohm load)
  Cardioid: 124.2 dB
  Supercardioid: 122.7 dB
  All values +6 dB at 0 gain
  
  Equivalent Output Noise (A-weighted)
  Cardioid: 28.0 dB SPL
  Supercardioid: 26.5 dB SPL
  
  Signal to Noise Ratio (referenced at 94 dB SPL)
  Cardioid: 66.0 dB
  Supercardioid: 67.5 dB
  
  Dynamic Range at 1 k ohm load
  96.2 dB
  100 dB at 0 gain
  
  Common Mode Rejection
  45.0 dB minimum
  
  Preamplifier Output Clipping Level (1% THD)
  -6.0 dBV (0.5 V)
  -12 dBV at 0 gain
  
  Polarity
  Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output connector.
  
  Power Requirements
  11 to 52 Vdc phantom, 2.0 mA
  
  Environmental Requirements
  Operating Temperature Range: -18 to 57 degrees C (0 to 135 degrees F)
  
  Relative Humidity
  0 to 95%
  
  Cable Length
  9 m (30 ft)