Product Overview
Type: Condenser (electret bias)
Frequency Response: 50—17000 Hz
Polar Pattern: Bidirectional
Output Impedance: EIA Rated at 150 Ohms (170 Ohms actual)
Output Configuration: Active balanced
Sensitivity (at 1 kHz , open circuit voltage): —37 dBV/Pa (42 mV) 1 Pascal=94 dB SPL: Maximum Sound Pressure Level (1 kHz at 1% THD, 1 kOhms load): 123 dB
Equivalent output Noise (A-weighted): 29 dB SPL
Signal-to-Noise Ratio (referenced at 94 dB SPL at 1 kHz): 65 dB
Dynamic Range (1 kOhms load at 1 kHz): 94 dB
Common Mode Rejection (10 Hz—100 kHz): 45 dB minimum
Preamplifier output Clipping level (1% THD): —8 dBV (0.4 V)
Polarity: 5-Pin XLR: Positive sound pressure on diaphragm produces positive_voltage on pin 4 relative to pin 2 of output XLR connector.
Logic Connections: LED IN: Active low (=1.0V), TTL compatible. Absolute maximum voltage:-0.7V to 50V.
Environmental Conditions: Operating Temperature: -18—57 C (0—135 degrees F); Storag
- Only 1.25 inch (3.8 cm) in diameter
Bidirectional polar pattern
Wide dynamic range and smooth frequency response
Bi-color status indicator
Logic input for remote LED control
Radio Frequency filtering CommShield Technology
Includes rubber isolation rings and fastening hex nut
Product Details
Shure MX395B LED Low Profile Boundary Microphone
The Shure MX395B LED Microflex Low Profile Bidirectional Boundary microphone is an ideal table microphone when minimal presence is of high priority. It is perfect for boardrooms, meeting rooms, and other sites where aesthetics are important. The MX395B LED mic is only 1" (2.5 cm) in diameter, and extends just 2 cm above the mounting surface when installed, yet it delivers clear, high-quality sound.
Order today with the no-risk assurance of our Total Satisfaction and Low Price Guarantees!
- Type: Condenser (electret bias)
Frequency Response: 50—17000 Hz
Polar Pattern: Bidirectional
Output Impedance: EIA Rated at 150 Ohms (170 Ohms actual)
Output Configuration: Active balanced
Sensitivity (at 1 kHz , open circuit voltage): —37 dBV/Pa (42 mV) 1 Pascal=94 dB SPL: Maximum Sound Pressure Level (1 kHz at 1% THD, 1 kOhms load): 123 dB
Equivalent output Noise (A-weighted): 29 dB SPL
Signal-to-Noise Ratio (referenced at 94 dB SPL at 1 kHz): 65 dB
Dynamic Range (1 kOhms load at 1 kHz): 94 dB
Common Mode Rejection (10 Hz—100 kHz): 45 dB minimum
Preamplifier output Clipping level (1% THD): —8 dBV (0.4 V)
Polarity: 5-Pin XLR: Positive sound pressure on diaphragm produces positive_voltage on pin 4 relative to pin 2 of output XLR connector.
Logic Connections: LED IN: Active low (=1.0V), TTL compatible. Absolute maximum voltage:-0.7V to 50V.
Environmental Conditions: Operating Temperature: -18—57 C (0—135 degrees F); Storage Temperature: -29—74 degrees C (-20—165 degrees F); Relative Humidity: 0—95%
Power Requirements : 48—52 Vdc phantom, 8.0 mA
