Shure PG81-LC Condenser Microphone

The Shure PG81-LC is a sensitive, flat-response condenser microphone ideal for miking acoustic instruments. Includes a microphone clip, 5/8"–3/8" thread adapter, and a storage bag.

Order today with the no-risk assurance of our Total Satisfaction and Low Price Guarantees!

• Microphone Type: Condenser (electret bias)
  Polar Pattern: Cardioid (unidirectional), symmetrical about axis
  Frequency Response: 40Hz–18kHz
  Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of microphone output connector
  Output Impedance (at 1kHz): 600 ohms
  Sensitivity (at 1kHz): -48 dBV/Pa, (4.0 mV), 1 Pascal = 94 dB SPL
  Electromagnetic Hum Sensitivity: -7 dB equivalent SPL in a 1 millioersted field (60 Hz)
  Switch: Built-in On/Off switch
  Recommended Input Load Impedance: 800 ohms minimum
  Output Clipping Level (1 kHz, 1 % THD): : 2000 ohm load, 13 dBV (0.22 V) phantom, -17 dBV (0.14 V) battery
  Maximum SPL: 2000 ohm load: 131 dB (phantom), 127 dB (battery)
  Self-Noise (Equivalent SPL): 20 dB typical, A-weighted
  Dynamic Range (maximum SPL, 2k ohm load, to A-weighted noise level): 111 dB (phantom); 107 dB (battery)
  Signal-to-Noise Ratio: 68 dB (IEC 651)* at 94 dB SPL
  
  Power
  Phantom Power:
  Supply Voltage: 11 to 52 Vdc
  Current Drain: 2.0 mA max at 52 Vdc
  Maximum Exteral Voltage Applied to Pins 2 and 3 with respect to Pin 1: +52 Vdc
  Reverse polarity protected to: 100 Vdc
  Battery Power:
  Recommended: 1.5 V alkaline AA size (NEDA 15A)
  Life: up to 10,000 hours
  
  Connector: 3-pin professional audio connector (male XLR type)
  Case: Steel and brass construction with black painted finish
  Environmental Conditions: This microphone operates over a temperature range of -20–135° F (-29–57° C) and at a relative humidity of 0 to 95%
  Weight: 0.55 lb. (250 g) without battery