Product Overview
Consumer Alert - Most users do not need a license to operate this wireless
microphone system. Nevertheless, operating this microphone system without a license
is subject to certain restrictions: the system may not cause harmful interference;
it must operate at a low power level (not in excess of 50 milliwatts); and it has
no protection from interference received from any other device. Purchasers should
also be aware that the FCC is currently evaluating use of wireless microphone systems,
and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC
(TTY: 1-888-TELL-FCC) or visit the FCC�s wireless microphone website at http://www.fcc.gov/cgb/wirelessmicrophones.
PGX2 Handheld Transmitter
Audio Input Level: +2 dBV maximum at —10dB position; —8 dBV maximum at 0dB position
Gain Adjustment Range: 10dB
RF Transmitter Output: 30 mW typical (dependent on applicable country regulations)
LED Status Indicator: Green - Ready; Flashing Green - Controls locked; Amber - Mute on; Flashing Red on startup - Battery is dead; Glowing Red - Battery power low; Pulsing Red after synchronization - transmitter and receiver incompatible; contact your Shure reseller
Dimensions (Length x Diameter) : 10 in. x 2 in (254 x 51 mm)
Weight: 10.2 oz. (290 grams) without battery
Housing: Molded ABS plastic handle and battery cup
Power Requirements: Two "AA" size or rechargeable batteries
Battery Life: >8 hours (alkaline)
Beta 58A Microphone Cartridge
Type: Supercardioid, Dynamic (moving coil)
Frequency response: 50 to 16,000 Hz
Neodymium magnet for high signal—to—noise outp
- PGX2 Handheld Transmitter
Automatic Transmitter Setup
Multi-function LED Indicator (power, lockout, mute, low battery)
300 ft. (92 m) operating range
Beta 58A Microphone Cartridge
Frequency response tailored for vocals, with brightened midrange and bass rolloff to control proximity effect
Uniform supercardioid pattern for high gain before feedback and superior rejection of off—axis sound
Neodymium magnet for high signal—to—noise output
Hardened steel mesh grille that resists wear and abuse
Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
Minimally effected by varying load impedance
Product Details
Shure PGX2/BETA58 Wireless Handheld Transmitter
The Shure PGX2/BETA58 Wireless Handheld Transmitter is comprised of the PGX2 transmitter fitted with the Beta 58 Supercardioid microphone cartridge. The Shure PGX2 transmitter features a multi-function status LED (power, lockout, mute and low battery), automatic transmitter setup, power and mute switch, and has an operating range of 300 ft. It operates on two "AA" size batteries.
The Beta 58A microphone accentuates the warmth and clarity of lead and backup vocals. Its supercardioid design provides maximum isolation from other onstage sounds. Shure professional audio products deliver legendary sound quality, stage-proven durability and hassle-free setup for worry-free performance.
Order today with the no-risk assurance of our Total Satisfaction and Low Price Guarantees!
- PGX2 Handheld Transmitter
Audio Input Level: +2 dBV maximum at —10dB position; —8 dBV maximum at 0dB position
Gain Adjustment Range: 10dB
RF Transmitter Output: 30 mW typical (dependent on applicable country regulations)
LED Status Indicator: Green - Ready; Flashing Green - Controls locked; Amber - Mute on; Flashing Red on startup - Battery is dead; Glowing Red - Battery power low; Pulsing Red after synchronization - transmitter and receiver incompatible; contact your Shure reseller
Dimensions (Length x Diameter) : 10 in. x 2 in (254 x 51 mm)
Weight: 10.2 oz. (290 grams) without battery
Housing: Molded ABS plastic handle and battery cup
Power Requirements: Two "AA" size or rechargeable batteries
Battery Life: >8 hours (alkaline)
Beta 58A Microphone Cartridge
Type: Supercardioid, Dynamic (moving coil)
Frequency response: 50 to 16,000 Hz
Neodymium magnet for high signal—to—noise output
Polar Pattern: Supercardioid, rotationally symmetrical about microphone axis, uniform with frequency.
Output Level (at 1,000 Hz): Open Circuit Voltage: -51.5 dBV/Pa* (2.6 mV)
*1 Pa = 94 dB SPL
Impedance: Rated impedance is 150 ohms (290 ohms actual) for connection to microphone inputs rated low Z Phasing. Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3.
