One of Shure's most popular vocal mics now in wireless form with a 24-bit/48kHz digital receiver.
- PGXD2 Handheld Transmitter Power, mute, and battery status LED
Up to 9 hours of continuous use from 2 AA batteries
200" (60m) operating range
10dB of adjustable gain
Lockable interface prevents accidental setting changes
Rugged construction for reliable performance show after show
PGXD4 Wireless Receiver
24-bit / 48kHz digital technology for incredibly accurate sound
Automatic frequency selection locates a clear channel instantly
One-touch sync automatically syncs the transmitter and receiver
True digital diversity delivers rock-solid wireless signal reliability
Up to 5 systems can be used at once
1/4" and XLR audio outputs
Performance tested, industry standard
Uniform cardioid pick-up pattern for maximum gain before feedback and excellent rejection of off-axis sound
Tailored frequency response specifically shaped for vocals, with brightened midrange and bass roll off to control proximity effect
Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
Steel-mesh grille and enamel-coated metal construction resist wear and abuse
Effective built in pop-filter reduces undesirable wind and breathe noise
Furnished with zippered storage bag and break-resistant stand adapter
Extremely durable under the heaviest use
Shure quality, ruggedness, and reliability
Shure PGXD24/SM58 Digital Wireless System with SM58 Mic
The PGXD24/SM58 Handheld Transmitter with SM58 Mic is designed to meet the needs of the traveling performer by pairing an industry-standard handheld dynamic vocal microphone with an exceptional transmitter and receiver.
The PGXD2 transmitter features automatic setup, a multi-function LED Indicator (power, lockout, mute, low battery), and provides you with up to 9 hours of continuous use on 2 AA batteries. It gives you and your microphone a generous 200' (60m) operating range without losing audio quality.
The PGXD4 receiver offers 24-bit/48kHz resolution for incredibly accurate sound, auto frequency selection, and greater reliability thanks to its true digital diversity.
The Shure SM58 mic is legendary for its uncanny ability to withstand abuse that would destroy any other microphone. The Shure SM58 has not only helped to define the sound of rock vocals on stage, it's also been used as a hammer to build stages and gone on to perform flawlessly later at the gig. Using a club's house system? You'll be singing through an SM58. And in the studio? Daniel Lanois always uses the SM58 or Beta 58 on Bono's vocals.
The Shure SM58 mic is world-renowned for its distinctive upper-midrange presence peak that ensures an intelligible, lively sound. Perfectly fits a performer's hand, balanced for total comfort during long gigs. Frequency response is a smooth, vocal-tailored 50Hz-15kHz, and the price is a bargain considering its life expectancy.
Besides the SM58 microphone, you also get a PGXD4 wireless receiver, PGXD2 handheld transmitter, padded case, and a microphone clip.
Order today with the no-risk assurance of our Total Satisfaction and Low Price Guarantees!
- PGX2 Handheld Transmitter
Audio Input Level:
+2 dBV maximum at –10dB position
–8 dBV maximum at 0dB position
Gain Adjustment Range: 10dB
RF Transmitter Output: 30 mW maximum (dependent on applicable country regulations)
Dimensions including SM58 cartridge: 254mm x 51mm dia. (10" x 2")
Weight: 290g (10.2oz.) without batteries
Housing: Molded PC/ABS handle and battery cup
Power Requirements: 2 AA size alkaline or rechargeable batteries
Battery Life: > 8 hours (alkaline)
Dimensions (HxWxD): 40mm x 181mm x 104mm (1.6" x 7.125" x 4.1")
Weight: 289g (10.2oz.)
Audio Output Level (ref. ±38kHz deviation, 1kHz tone): XLR connector (into 3000O load): -2.5dBV 1/4" connector (into 10000O load): +10 dBV
Sensitivity: -102 dBm @ 10-5 BER
Image rejection: > 70dB, typical
Impedance balanced Pin 1: Ground (cable shield)
Pin 2: Audio
Pin 3: No Audio
Red: 2dB below clip
Amber: 12dB below clip
Green: 50dB below clip
Power Requirements: 12-18 Vdc at 150 mA, supplied by external power supply
Pin Assignments: XLR: 1 = ground, 2 = hot, 3 = cold 6.35mm (1/4") TRS: Tip = audio, Ring = no audio, Sleeve = ground
Type: Dynamic (moving coil)
Frequency response: 50 to 15kHz
Polar Pattern: Unidirectional (cardioid), rotationally symmetrical about microphone axis, uniform with frequency
Sensitivity (at 1,000Hz Open Circuit Voltage): -54.5dBV/Pa (1.85 mV), 1 Pa = 94dB SPL
Impedance: Rated impedance is 150O (300O actual) for connection to microphone inputs rated low impedance
Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
Connector: 3-pin professional audio connector (male XLR type)
Case: Dark gray, enamel-painted, die-cast metal; matte-finished, silver, spherical steel mesh grille
Overall dimensions: 6-3/8"L, 2"W
Net weight: 298g (10.5oz.)