Get one of the most popular mics around, and now you'll get a shock mount bag and case too.
- Uniform cardioid pattern for superior off axis rejection
Superior transient response from a low-mass large Mylar® diaphragm
Flat, neutral frequency response for natural reproduction on stage or in the studio
3-position switchable low-frequency filter helps reduce unwanted background noise or counteract proximity effect for consistent, extended low-end
Durable metal construction.
3 separate mesh layers reduces wind and breath noise.
15dB pad for performance consistency across a wider range of high SPL sources
Includes a rubber suspension shock mount ideal for isolating stand vibrations in recording applications, and a velveteen storage pouch that protects the microphone when not in use
Shure SM27 Large Diaphragm Condenser Microphone with Case, Shockmount, & Bag
The Shure SM27 is a rugged, versatile, large-diaphragm, side-address cardioid microphone. It has low self-noise and extended frequency response that picks up vocal and instrument nuances with clarity. The SM27 recording mic's durable Shure construction features 3 separate mesh layers that reduce wind and breath noise. It includes a rubber suspension shock mount ideal for isolating stand vibrations in recording applications, a velveteen storage pouch that protects it when not in use, and a case.
Order today with the no-risk assurance of our Total Satisfaction and Low Price Guarantees!
Cartridge type: Externally Biased Condenser
Frequency response: 20 to 20,000Hz
Directional polar pattern: Cardioid
Output impedance: EIA Rated at 150O (140O actual)
Attenuation switch: 0 or 15dB attenuation
Low Frequency response switch:
Flat, -6dB/octave below 115Hz, -18dB/octave below 80Hz
Phantom Power: 48 VDC ±4 VDC (IEC 268 15/DIN 45 596), positive pins 2 and 3
Current drain: 5.4 mA typical at 48 VDC
Common mode rejection: >50dB, 20Hz to 20kHz
Polarity: Positive pressure on diaphragm produces positive voltage on output pin 2 relative to pin 3
Dimensions and Weight:
53.0mm (2.08") maximum body diameter, 156.2mm (6.15") long; 642g (22.6oz..)
Sensitivity: (typical, at 1000Hz; 1Pa = 94dB SPL): -37dBV/Pa
Self noise (typical, equivalent SPL; A weighted, IEC 651): 9.5dB
Maximum SPL (1000Hz at 1% THD): 2500O load (Attenuator on): 138 (153)dB, 1000O load (Attenuator off): 133 (148)dB
Output Clipping Level (20Hz to 20kHz; THD < 1%. THD of the microphone preamplifier when applied input signal is equivalent to the cartridge output at specified SPL): 2500O load (7dBV), 1000O load (1dBV)
Dynamic Range: 2500O load (128dB), 1000O load (123dB)
Signal-to-Noise ratio (S/N ratio is difference between 94dB SPL and equivalent SPL of self-noise A-weighted): 84.5dB