• Shop
    • Woodwind Instruments
    • Woodwind Accessories
    • Brass Instruments
    • Brass Accessories
    • Marching Band
    • Concert Percussion
    • Drums & Percussion
    • Orchestral Strings
    • Stands & Accessories
    • Books & Sheet Music
    • Classroom & Kids
    • Keyboards & MIDI
    • Pro Audio & Software
    • Guitars
    • Basses
    • Folk & Traditional
    • Amplifiers & Effects
    • On Sale
    • With Rebates
  • Rentals
  • Locations
  • Lessons
  • Repairs
  • Hot Deals
  • Educators
Home > Pro Audio > Microphones & Wireless Systems > Wireless Systems > Handheld Microphone Wireless Systems > Shure ULXP24/87 Handheld Wireless Microphone System

Handheld Microphone Wireless Systems

  • Print the following sections:
  • Overview
  • Details
  • Reviews
Item #: 270797 109
Mfg #: ULXP24/87-M1

   0 Reviews0 Reviews | Write a Review

Price: $979.00
This Item requires building a kit.
Please start below


Rebate Available


Download Rebate
Rebates Available
View Rebates
Product Overview

Professional grade.

  • ULXP4 Wireless Diversity Receiver
    Automatic Frequency Selection with group scan function
    Over 1400 selectable frequencies
    5-segment transmitted audio signal strength meter
    RF indicator
    3-segment transmitter battery fuel gauge
    Advanced multi-function LCD displays group and channel
    Mic/Line switch
    Remotable 1/2-wave antenna
    XLR and 1/4-inch output
    Rugged plastic chassis
    1/2 rack design

    ULX2 Handheld Transmitter
    8-9 Hour Battery Life
    Power: On/Off Switch, Battery
    LED-Green When ON, Red When Battery Low
    Three-segment Battery Power Icon
    PEAK Icon-Appears When Audio Signal Overloads
    Group/Channel Displays
    SET Button for Saving Settings
    Adjustable Audio Gain Control
    Input Attenuation Switch-Select 0dB for Voice/Low Output; 20dB for High Output
    4-pin Mini Connector
    Battery Cover Unscrews to Expose Battery and Gain Control
    9V Battery Included

    SM87A Vocal Microphone
    Highly directional supercardioid pickup pattern
    Controlled low-frequency roll-off
    Very low RF and magnetic hum susceptibility
    Minimally affected by varying load impedance
    Built-in wind and pop filter
    Transducer element shock mounted
    Rugged construction for outstanding reliability
    Field-usable over a wide range of temperature and humidity conditions
    Accepts a wide variety of phantom power sources, including DIN 45 596 voltages of 11 and 52 Vdc
Product Details

Shure ULXP24/87 Handheld Wireless Microphone System

The Shure ULXP24/87 is a handheld professional wireless microphone system that features the ULXP4 Diversity Receiver and the ULX2 Handheld Transmitter fitted with the SM87 Handheld Mic. ULX Standard UHF systems represent a breakthrough in performance and price for both working musicians and professional sound installers. ULX Professional systems offer more advanced features and controls, including lockable settings and group scan function. Over 1400 selectable, pre-programmed frequencies are available, and Automatic Frequency Selection provides a straight shot to a clear channel.

ULXP4 Wireless Diversity Receiver

The expanded feature set of the ULXP4 wireless receiver, with advanced settings and controls including lockable settings and group scan, offers a direct path to full, clear audio signals. The ULXP4 offers an exceptional value in both performance and price, for both working musicians and sound installers.

ULX2 Handheld Transmitter

The ULX2 Handheld Transmitter has a 3-segment battery fuel guage, Backlit LCD shows group and channel, Frequency and power settings, and Control lockout.

SM87A Vocal Microphone

The Shure SM87A microphone is a professional-quality, handheld condenser microphone for use in sound reinforcement, broadcasting, and studio recording installations. Its supercardioid polar pattern provides greater rejection of unwanted sound sources, making it ideal for miking individual instruments in a multi-microphone setting or for miking single sources in a reverberant or noisy environment. An integral three-stage wind and pop filter protects against wind and breath noise. Its built-in shock mount reduces stand and handling noise.

Order today with the no-risk assurance of our Total Satisfaction and Low Price Guarantees!

  • RF Carrier Frequency Range: 554.000 to 865.000 MHz (Available frequencies depend on the applicable regulations in the country where the system is
    used). Refer to the frequency supplement supplied with the system.
    Effective Range: 100 m (300 ft.) under optimal conditions (NOTE: Actual working range depends on RF signal absorption, reflection, and interference)
    Audio Frequency Response: 25 to 15,000 Hz, ± 2dB (NOTE: Overall system frequency response depends on the microphone element.)

    ULXP4 Receiver Input
    Connector: Antenna Power Input
    Connector Type: BNC IEC 320
    Actual Impedance: 50 Ohms
    Nominal Input Level: —95 to —30 dBm 15 Vdc
    Maximum Input Level: +6 dBm (—20 dBm recommended) 18 Vdc
    Pin Assignments: Shell = Ground Center = Signal IEC Standard
    Voltage for Remote Power: 12 Vdc, 150 mA maximum

    ULXP4 Receiver Output
    Connector: High Z Audio; Low Z Audio
    Output Configuration: High Z Audio Unbalanced (1/4 in.); Low Z Audio Balanced (XLR)
    Actual Impedance: High Z Audio 3 k0hms; Low Z Audio 22
    Nominal Input Level: High Z Audio Pin Assignments: Tip = Hot Ring/ Sleeve = Gnd: Low Z Audio 1 = Ground 2 = Hot 3 = Cold
    Voltage/Current/Phantom: Power Protection?: High Z Audio; Yes Low Z Audio Yes
    Transmitter Audio Polarity: Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive
    voltage on pin 2 (with respect to pin 3 of low impedance output) and the tip of the high impedance 1/4-inch output
    Transmitter Gain Adjustment Range: ULX2: 25 dB
    Receiver Audio Output Level (± 38 kHz deviation, 1 kHz tone):
    XLR connector (into 600 ohm load): +3.9 dBV (line), —17 dBV (mic)
    1/4 inch connector (into 3000 ohm load): —2 dBV
    Impedance
    ULX1 (input): 1 Megohm ULXS4, ULXP4 (output): 50 ohms at line level; 2000 ohms at mic level
    Modulation: ± 38 kHz deviation compressor-expander system with pre- and de-emphasis.
    RF Power Output: ULX2: 30 mW maximum
    Dynamic Range: >100 dB, A-weighted
    RF Sensitivity: 1.26 uV for 12 dB SINAD (typical)
    Image Rejection: 80 dB typical
    Spurious Rejection: 75 dB typical
    Ultimate Quieting (reference ± 38 kHz deviation): >105 dB, A-weighted
    System Distortion (reference ± 38 kHz deviation, 1 kHz modulation): 0.3% total harmonic distortion, typical
    Power Requirements: ULX2: 9V alkaline battery; 8.4 V Nicad optional; ULXS4: 14 - 18 Vdc (negative ground), 550 mA
    Battery Life: 8 to 9 hours (with 9V alkaline battery)
    Operating Temperature Range: - 20 degrees to 49 degrees C (- 4 degrees to 120 degrees F)
    NOTE: Battery characteristics may limit this range.
    Dimensions (Length x Diameter): ULX2/87: 8.8 x 2 in. (223.5 x 51 mm);
    Dimensions (H x W x D): ULXP4: 1.72 in. x 8.56 in. x 6.88 in. (43 mm x 214 mm x 172 mm)
    ULX2/87: 9.1 oz. (258 g) without battery
    ULXP4: 2 lbs 7 oz. (1105 g)

    87 Vocal Microphone
    Transducer Type: Condenser (electret bias)
    Frequency Response: 50 to 20,000 Hz
    Polar Pattern: Supercardioid
    Output Impedance: Rated at 150 ohms (100 ohms actual +/- 20%)
    Recommended minimum load impedance: 800 ohms
    Sensitivity (at 1,000 Hz): Open Circuit Voltage: -52.5 dBV/Pa (2.4 mV)
    (1 Pa = 94 dB SPL)
    Clipping Level (at 1,000 Hz): 1000 ohm Load: -6 dBV (0.5 V)
    Maximum SPL (at 1,000 Hz): 140.5 dB (0.25% THD, 1000 ohm load)
    Self-Noise (equivalent sound pressure level; measured with true RMS voltmeter): 24 dB typical, A-weighted; 26 dB typical, weighted per DIN 45 405
    Dynamic Range: 116.5 dB (maximum SPL to A-weighted noise level)
    Signal-to-Noise Ratio: 70 dB at 94 dB SPL (IEC 651) - S/N ratio is difference between 94 dB SPL and product's equivalent self noise (SPL A-weighted).
    Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3
    Power: Phantom Supply Requirement: 11 to 52 Vdc, positive at both pins 2 and 3 Current Drain: 1.0 to 1.2 mA
    Connector: Three-pin (XLR) professional audio
Customer Reviews
You must be signed in to write a review. Please click here to sign in.