• Shop
    • Woodwind Instruments
    • Woodwind Accessories
    • Brass Instruments
    • Brass Accessories
    • Marching Band
    • Concert Percussion
    • Drums & Percussion
    • Orchestral Strings
    • Stands & Accessories
    • Books & Sheet Music
    • Classroom & Kids
    • Keyboards & MIDI
    • Pro Audio & Software
    • Guitars
    • Basses
    • Folk & Traditional
    • Amplifiers & Effects
    • On Sale
    • With Rebates
  • Rentals
  • Locations
  • Lessons
  • Repairs
  • Hot Deals
  • Educators
Home > Pro Audio > Microphones & Wireless Systems > Wireless Systems > Instrument Wireless Systems > Shure ULXS14/98 Clip-On Wireless Instrument System

Microphones & Wireless Systems

  • Print the following sections:
  • Overview
  • Details
  • Reviews
Item #: 270789 109
Mfg #: ULXS14/98H-M1

   0 Reviews0 Reviews | Write a Review

Price: $759.00
This Item requires building a kit.
Please start below


Rebate Available


Download Rebate
Rebates Available
View Rebates
Product Overview

A pro-level system with the performance and features you need.

  • WB98H/C Instrument Microphone
    Tailored frequency response for studio quality performance
    Wide dynamic range for use in high SPL environments
    Uniform supercardioid pattern for high gain before feedback and superior rejection of off-axis sound
    Optional A98D drum mount is unobtrusive and versatile—allows precise positioning of the microphone while holding it firmly in place
    Compact design reduces stage clutter
    Detachable cable for easy storage
    Interchangeable microphone cartridges with different polar patterns are available
    Legendary Shure quality, ruggedness, and reliability

    ULX1 Wireless Bodypack Transmitter
    Three-segment battery fuel gauge
    Frequency and power lockout
    Flexible 1/4 wave antenna
    TA4F mini four-pin input connector
    Backlit LCD display shows group and channel setting
    Adustable audio gain control
    Input attenuation switch (selects 0 dB or -20 dB attenuation)
    PEAK icon appears when audio input overloads the transmitter
    Power on/off switch
    8 hour battery life (9V battery)
    300 foot (100m) operating range

    ULXS4 Diversity Receiver
    Automatic Frequency Selection with group scan function
    Over 1400 selectable frequencies
    5-segment transmitted audio signal strength meter
    RF indicator
    3-segment transmitter battery fuel gauge
    Advanced multi-function LCD displays group and channel
    Mic/Line switch
    Remotable 1/2-wave antenna
    XLR and 1/4-inch output
    Rugged plastic chassis
    1/2 rack design
Product Details

Shure ULXS14/98 Clip-On Wireless Instrument System

The Shure ULXULXS14/98 Standard Wireless Instrument System, includes WB98H/C Clip-On Cardioid Condenser Instrument Microphone, ULX1 Bodypack Transmitter, and ULXS4 Diversity Receiver.

WB98H/C Instrument Microphone
The Shure WB98H/C is a premium cardioid condenser instrumental microphone that features transformerless preamplifier circuitry, which improves linearity across the full frequency range. The pickup pattern of the Beta 98H/C provides high gain-before-feedback and excellent rejection of unwanted noise.

Its high maximum sound pressure level (SPL) enables it to handle the extreme demands of brass, woodwind and percussion instruments. The WB98H/C easily clamps onto the bell of wind instruments or onto the rim of percussion instruments. The integrated gooseneck and ratcheting swivel joint allows the microphone to be easily positioned and secured in place, and an isolation shock-mount reduces the transmission of instrument 'key noise' and other mechanical noise. A gooseneck angle brace is included to provide better retention of the microphone placement during more active performances.

ULX1 Wireless Bodypack Transmitter
The low-profile, highly durable body-pack ULX1 has all the characteristics to meet the demands of high performance. For use with headworn, lavalier and instrument microphones, as well as guitars and basses. Attaches to belt, waistband or guitar strap with clip for hands-free mobility.

Shure ULXS4 Standard Receiver
The Shure ULXS4 Standard receiver offers an exceptional value in both performance and price, for both working musicians and sound installers. The feature set of the versatile ULXS4 receiver offers a direct path to full, clear audio signals, unencumbered and unattached.

Order today with the no-risk assurance of our Total Satisfaction and Low Price Guarantees!

  • RF Carrier Frequency Range: 554.000 to 865.000 MHz (Available frequencies depend on the applicable regulations in the country where the system is
    used). Refer to the frequency supplement supplied with the system.
    Effective Range: 100 m (300 ft.) under optimal conditions (NOTE: Actual working range depends on RF signal absorption, reflection, and interference)
    Audio Frequency Response: 25 to 15,000 Hz, (± 2 dB
    NOTE: Overall system frequency response depends on the microphone element.

    ULX1 Transmitter Input
    Connector: TA4F
    Input Configuration: Unbalanced, active
    Actual Impedance: 18 kohms with lavalier microphone; 1 Mohms with instrument cable
    Maximum Input Level: 10 Vp—p (12 dBV) for 1% THD at minimum gain setting
    using 1 kHz signal.
    TA4F Connector Pin Assignments: Pin 1: Tied to Ground; Pin 2: Tied to +5 V; Pin 3: Tied to Audio; Pin 4: Tied thru 20kohms Resistor to Ground. (On instrument adapter cable, Pin 4 floats)
    Voltage for Remote Power: +5 V supplied to microphone cartridge

    ULX1 Transmitter Output
    Actual Impedance: 50 Ohms
    Nominal Output Level: 20 mW
    Maximum Output Level: 30 mW

    ULXS4 Receiver Input
    Connector Type: Antenna - BNC; Power Input — IEC 320
    Actual Impedance: Antenna 50 Ohms
    Nominal Input Level: Antenna - —95 to —30 dBm; Power Input — 15 Vdc
    Maximum Input Level: Antenna - +6 dBm (—20 dBm recommended); Power Input - 18 Vdc
    Pin Assignments: Antenna Shell = Ground Center = Signal; Power Input - IEC Standard
    Voltage for Remote Power: Antenna 12 Vdc, 150 mA maximum

    ULXS4 Receiver Output
    Connector: High Z Audio; Low Z Audio*
    Output Configuration: High Z Audio - Unbalanced (1/4 in.); Low Z Audio - Balanced (XLR)
    Actual Impedance: High Z Audio - 3 kohms; Low Z Audio - 22 ohms
    Pin Assignments: High Z Audio Tip = Hot Ring/ Sleeve = Gnd Low Z Audio 1 = Ground, 2 = Hot, 3 = Cold
    Voltage/Current/PhantomPower Protection?: High Z Audio — Yes; Low Z Audio — Yes
    Output Level: Microphone Level = Line Level — 20 dB

    Transmitter Audio Polarity: Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive
    voltage on pin 2 (with respect to pin 3 of low impedance output) and the tip of the high impedance 1/4-inch output
    Transmitter Gain Adjustment Range: 25 dB
    Receiver Audio Output Level (± 38 kHz deviation, 1 kHz tone): XLR connector (into 600 ohm load): +3.9 dBV (line), —17 dBV (mic); 1/4 inch connector (into 3000 ohm load): —2 dBV
    Modulation: ±38 kHz deviation compressor-expander system with pre- and de-emphasis.
    RF Power Output: 30 mW maximum (ULX1)
    Dynamic Range: >100 dB, A-weighted
    RF Sensitivity: 1.26 uV for 12 dB SINAD (typical)
    Image Rejection: 80 dB typical
    Spurious Rejection: 75 dB typically
    Ultimate Quieting (reference ±38 kHz deviation): >105 dB, A-weighted
    System Distortion (reference ±38 kHz deviation, 1 kHz modulation): 0.3% total harmonic distortion, typical
    Power Requirements: ULX1- 9V alkaline battery (8.4 V Nicad optional);
    ULXS: 14 - 18 Vdc (negative ground), 550 mA
    Battery Life: 8 to 9 hours (with 9V alkaline battery)
    Operating Temperature Range: - 20 degrees to 49 degrees C (- 4 degrees to 120 degrees F) NOTE: Battery characteristics may limit this range.

    ULX1 Dimensions (H x W x D): 3.86 x 2.68 x 1.10 in. (96.5 x 67 x 26.7 mm)
    ULX1 Net Weight: 79 g (2.8 oz.) without battery

    ULXS4 Dimensions (H x W x D): 1.72 x 8.56 x 6.52 in. (43 x 214 x 163 mm)
    ULXS4 Net Weight: 2 lbs, 5 oz. (1,049 g)

    WB98H/C Instrument Microphone
    Type Condenser: (electret bias)
    Polar Pattern: Unidirectional (cardioid)
    Frequency Response: 20 to 20,000 Hz
    Output Impedance: 1200 Ohms
    Output Level (0 dB = 1 volt per Pascal): Open Circuit Voltage —56.5 (1.5mV)
    Output Clipping Level (at 1kHz, THD 1.0 k): -9 dBV (0.35 V)
    Maximum SPL: 143.5 dB
Customer Reviews
You must be signed in to write a review. Please click here to sign in.