TASCAM Track Pack SE

This TASCAM TrackPack SE USB Bundle comes with the TASCAM US-122mkII USB 2.0 computer interface, Cubase LE5 music production software, TASCAM TM-78 large condenser microphone with stand, and TASCAM HP-VT1 closed-ear headphones. The package contains the key recording equipment you need to turn your Mac or PC into a total production system for music, podcasting, or production.

The US-122mkII recording interface is your computer's gateway into the audio world. More than just a soundcard, it has a pair of pro-quality microphone preamps for connecting any type of microphone. High-quality condenser microphones — like the included TASCAM TM-78 — need power to operate, which is achieved with the phantom power switch. Another switch turns on the line input, for recording powered devices like keyboards, drum machines, and guitar amp modelers. You can even plug your guitar or bass directly into the TASCAM US-122mkII. With two inputs, you can record two microphones or sources at once.

The TASCAM US-122 mkII audio interface connects to Mac or Windows computers using USB 2.0, and the unit is powered over the USB cable. Zero-latency monitoring is available for recording without the delay going to a computer and back. MIDI input and output jacks allow connection of synths and drum machines. Connect the US-122mkII to monitors through the line output or use the included TASCAM HP-VT1 closed-ear headphones with the front-mounted stereo 1/4" jack. The US-122mkII makes a perfect portable recording interface with metal components and solid construction built for the road.

This gear pack also comes with Cubase LE5 software, a powerful music workstation combining audio and MIDI recording, editing and mixing in a single, integrated software package. This music production software gives you plenty of tracks - up to 48 - to put together a song arrangement, one track at a time. It's simple to use, and you can edit your tracks to fix timing and mistakes to put together a perfect take. Cubase LE5 has a professional-quality mixer built in with plug-in effects like reverbs, compressors, distortion, auto-pan, and more. You can add more VST plug-ins later and there are more free and commercial VST plug-ins than any other format. Cubase LE5 supplies everything you need to record, edit and produce your music, turning it into a polished, professional CD.

Order today with the no-risk assurance of our Total Satisfaction and Low Price Guarantees!

• TASCAM US-122mkII Audio Interface
  Analog audio inputs and outputs
  Mic input: XLR, balanced
  Nominal input level
  —58 dBu (INPUT control set to MIC), 14 dBu (INPUT control set to LINE)
  Maximum input level: +2 dBu (INPUT control set to LINE)
  Headroom: 16 dB
  Input impedance: 2.2 kOhm
  Line input: 6.3-mm jack, unbalanced
  Nominal input level: —40 dBu (INPUT control set to MIC): +4 dBu (INPUT control set to LINE)
  Maximum input level: +20 dBu (INPUT control set to LINE)
  Headroom: 16 dB
  Input impedance: 15 kOhm
  Guitar input (LINE/GUITAR IN R, GUITAR position): 6.3-mm jack, unbalanced
  Nominal input level: —51 dBu (INPUT control set to MIC)
  -7 dBu (INPUT control set to LINE)
  Maximum input level: +9 dBV (INPUT control set to LINE)
  Headroom: 16 dB
  Input impedance: 1 MOhm
  Line output (LINE OUT): RCA, unbalanced
  Nominal output level: —10 dBV
  Maximum output level: +6 dBV
  Output impedance: 200 Ohm
  Phones output (PHONES): 6.3-mm stereo jack
  Maximum output power: 18 mW + 18 mW (32 Ohm)
  
  Other inputs and outputs
  MIDI IN and MIDI OUT: 5-pin DIN connector (conform to MIDI specification)
  USB port: USB series B connector (4-pin)
  Format: USB 2.0 High speed (480 MHz), USB 2.0 Full speed (12 MHz, USB 1.1 equivalent)
  
  Audio performance
  Sampling rate: 44.1 kHz / 48 kHz, 88.2 kHz / 96 kHz (USB 2.0, High-speed only)
  Bit depth: 16/24 bit
  Frequency response (MIC IN to LINE OUT), 44.1/48 kHz sampling rate: 20 Hz – 20 kHz, +0.5 dB/—1 dB
  Frequency response (MIC IN to LINE OUT), 88.2/96 kHz sampling rate: 20 Hz – 40 kHz, +0.5/—1.5 dB
  Signal-to-noise ratio (LINE IN to LINE OUT, INPUT control set to LINE, 20 kHz LPF), Through ADC and DAC: 98 dB(A)
  Signal-to-noise ratio (LINE IN to LINE OUT, INPUT control set to LINE, 20 kHz LPF), Through direct monitor: 107 dB(A)
  Total harmonic distortion (LINE IN to LINE OUT, INPUT control set to LINE, 1 kHz, +20 dBu input, 20 kHz LPF), Through ADC and DAC: 0.0045%
  Total harmonic distortion (LINE IN to LINE OUT, INPUT control set to LINE, 1 kHz, +20 dBu input, 20 kHz LPF), Through direct monitor: 0.002%
  
  Power supply and other specifications
  Power supply: via USB (5 V, max. 500 mA)
  Operating temperature: 5—35 ° C
  Dimensions (L x W x H): 7.04" x 5.35" x 1.85" (179 x 136 x 47 mm)
  Weight: 0.7 kg
  Included accessories: USB cable
  
  TASCAM HP-VT1 Headphones
  Type: Closed-back Stereo dynamic
  Drive Unit: 40mm w/NdFeB magnet
  Frequency Range: 20Hz-20KHz
  Efficiency: 105dB SPL/V @ +or -3dB, 1mW @ 1KHz
  Sensitivity: 98dB +or -3dB (0dB=1V/Pa)
  Impedance: 32 ohms (+ or -15%)
  Max. Input: 50mw
  Normal Power Input: 1mW
  Connector: 1/4" TRS
  Cable Length: 3 meters
  
  Cubase LE5 System Requirements
  Windows
  OS: Windows XP (SP2 or later) / Vista / 7
  CPU: 2GHz or higher (Dual Core CPU recommended)
  RAM: 1GB or higher (1GB or higher recommended)
  HDD: 4GB of free disk space
  DVD-ROM drive
  Internet access required for license activation
  
  Macintosh
  OS: OS X 10.5.5 or later / 10.6
  CPU: PowerPC G5 or higher (Intel Core Duo CPU recommended)
  RAM: 1GB or higher
  HDD: 4GB of free disk space
  DVD-ROM drive
  Internet access required for license activation