Nady DW-11 Digital Wireless Lapel & Headset Microphone System - QPSK modulation - XLR and 1/4" outputs

  • Item # 1558825
  • Model # DW-11-LT-HM

The Nady DW-11-LT-HM digital wireless lapel and headset microphone system comes with both a fantastic sounding LM-14 lapel microphone AND a dynamic and sturdy Nady HM-3 headset microphone to use with… Learn More

$99.00

Reserve Now! This item is backordered but it is available to reserve now. You will not be charged until the item ships.

Ship to Store

2-7 business days

Wireless microphone system with headset and lapel mikes.

The Nady DW-11-LT-HM digital wireless lapel and headset microphone system comes with both a fantastic sounding LM-14 lapel microphone AND a dynamic and sturdy Nady HM-3 headset microphone to use with the included bodypack transmitter for ultimate versatility. This budget friendly “plug-and-play” system is ideal for presenters, performers and interviewers alike. Order the Wireless Lapel and Headset Microphone System today.

Features

  • State-of-the-art, professional 24-bit digital conversion technology for exceptional audio clarity with transparent frequency response across the entire audible range (20Hz to 20,000Hz)
  • Clear Signal operation in the 900 MHz Band
  • Sophisticated RF filtering for optimal simultaneous operation of multiple systems in the same location 
  • Reliable long range operation
  • Digital transmission virtually eliminates interference from nearby obstacles and noise from your audio
  • Extended operating range up to 300 feet line-of-sight

Technical Specification

Nady DW-11 Digital Wireless Lapel & Headset Microphone System - QPSK modulation - XLR and 1/4" outputs

System Specs

  • Frequency Response: 20Hz – 20kHz ± 3dB
  • Dynamic Range: 120dB (A-weighted)
  • Total Harmonic Distortion: <0.1%
  • Latency: 3msec (48kHz Sample Rate)
  • RF Carrier Frequency Range: Selected frequencies between 902 and 951MHz 
  • Frequency Stability: ± 20PPM, PLL controlled
  • Modulation: Digital QPSK
  • Operating Range: Up to 300 ft. typical (depending on site conditions); optimum line-of-sight
  • Receiver Specs
  • Reception: External 7.25” (18.5cm) attached antenna 
  • Receiver Sensitivity: -94dBm
  • Controls: Power ON/OFF, Volume Control
  • Connectors: 1/4” (6.35 mm) unbalanced phone jack (360 mV/ no load) 
  • XLR balanced output (±12 mV/600Ω load)
  • LED Indicators: Power ON, RF/AF LEDs
  • Unwanted Signal Rejection: 60dB image and spurious
  • Power Requirements: DC 13.5V Regulated @ 400mA
  • DC input: 2.1mm jack
  • Weight and Dimensions: 0.75 lb. 8" x 6" x 1.75"

Digital LT Transmitter Specs

  • RF Power Out: +13dBm, (50mW maximum allowed by FCC)
  • RF Spurious Emissions: –50 dB
  • Audio Inputs: 1/8" (3.5mm) locking mini-jack, for headworn or lavalier Mic
  • Controls: Power switch, Audio Mute
  • LED Indicator: Unit on (single flash), Low Battery Alert (red)
  • Battery Type: 2 AA Alkaline
  • Battery Life: Up to 11 Hours
  • Weight and Dimensions: 0.15 lb. 2.5" x 4.25" x 0.5"