Seymour Duncan Blackouts AHB-1 Humbucker Set

  • Item # 1011103
  • Model # 11106-32-B
Top Rated

Seymour Duncan Blackouts are 9-volt active neck and bridge humbuckers that provide more extended frequency response with less compression. Seymour Duncan engineers have captured the tone players want… Learn More

$199.00

Reserve Now! This item is backordered but it is available to reserve now. You will not be charged until the item ships.

Ship to Store

2-7 business days

Blackout the bad hum, crank up the tone.

Technical Specification

Seymour Duncan Blackouts AHB-1 Humbucker Set

  • AHB-1 Blackout Neck Model Specifications
  • Resonant Frequency: 750 Hz
  • Average Output Voltage: 0.65 Volts RMS (1)
  • Maximum Output Voltage: 2.60 Volts RMS (2)
  • Noise: -97dBV
  • Output Impedance: 1K Ohm
  • Current Consumption: 350 micro-amperes
  • Battery Life: 1420 hours (3)
  • Preamp Topology: Discrete hybrid differential, FET input
  • Preamp Gain: 16 dB
  • Preamp THD at 1V: .003%
  • AHB-1 Blackout Bridge Model Specifications
  • Resonant Frequency: 530 Hz
  • Average Output Voltage: 2.00 Volts RMS (1)
  • Maximum Output Voltage: 2.60 Volts RMS (2)
  • Noise: -96dBV
  • Output Impedance: 1K Ohm
  • Current Consumption: 350 micro-amperes
  • Battery Life: 1420 hours (3)
  • Preamp Topology: Discrete hybrid differential, FET input
  • Preamp Gain: 18 dB
  • Preamp THD at 1V: .003%
  • Notes:
  • (1) Output voltage measured under the following conditions:
  • a. Pickups installed in a guitar and set up for typical playing conditions.
  • b. Neck pickup adjusted approx. 3/16" from strings.
  • c. Bridge pickup adjusted approx. 1/8" from strings.
  • d. String gauge used - .010 to .046
  • e. Open E-chord strummed at moderate intensity.
  • f. 5 sample average reading taken using storage oscilloscope.
  • (2) Maximum output voltage is taken at the onset of clipping in the preamp when powered from a 9 Volt source.
  • Battery life computed for one pickup. Divide by two for life of set.