Shure Axient Digital AD4QNP Four-Channel Receiver - without accessories

  • Item # 1543266
  • Model # AD4QNP=-A

The AD4Q Axient Digital Quad Receiver sets a new standard in transparent digital audio and maximum spectral efficiency. Groundbreaking performance features include wide tuning, low latency, High Densi… Learn More

$5,700.00

Availability: Order Now!

Ship to Store

2-7 business days

Quad Receiver for transparent digital audio.

The AD4Q Axient Digital Quad Receiver sets a new standard in transparent digital audio and maximum spectral efficiency. Groundbreaking performance features include wide tuning, low latency, High Density (HD) mode, and Quadversity™, ensuring solid performance in the most challenging RF environments. Networked control, AES3 + AES67 + Dante™ and signal routing options bring a new level of management and flexibility to your entire workflow. Compatible with all Axient Digital transmitters. For solid performance in the most challenging of environments

Features

  • Wide tuning range up to 184MHz
  • True digital diversity reception per channel for drop-out resistance
  • Networked control with Wireless Workbench® and ShurePlus™ Channels app
  • Quadversity™ mode for extended antenna coverage and improved RF signal-to-noise
  • Front panel headphone jack enables Dante Cue and Dante Browse monitoring
  • Configurable Ethernet switch for redundant Dante digital output
  • Switchable XLR/AES3 outputs• Channel Quality meter displays RF signal-to-noise
  • Locking AC connectors• Optional DC module available to support redundant power

Technical Specification

Shure Axient Digital AD4QNP Four-Channel Receiver - without accessories

  • Dimensions: 44 mm × 483 mm × 333 mm (1.7 in. × 19.0 in. × 13.1 in.), H × W × D
  • Weight: 4.8 kg (10.6 lbs.), without antennas
  • Housing: Steel; Extruded aluminum
  • Power Requirements: 100 to 240 V AC, 50–60 Hz; 0.68 A max.
  • Thermal Dissipation: Maximum: 31 W (106 BTU/hr)
  •                                       Idle: 21 W (72 BTU/hr)

Audio Output

  • Gain Adjustment Range: –18 to +42 dB in 1 dB steps (plus Mute setting)
  • Configuration: 1/4" (6.35 mm):  Transformer-coupled Balanced 
  •                                              (Tip=audio, Ring=no audio, Sleeve=ground)
  •                                                         XLR: Transformer-coupled Balanced (1=ground, 2=audio +, 3=audio -)
  • Impedance Typical, XLR Line out: 100Ω
  • Full Scale Output: 1/4" (6.35 mm):  +8 dBVXLR
  • 200 k Ω load: XLR:  LINE setting= +18 dBV, MIC setting= –12 dBV
  • Mic/Line Switch: 30dB pad
  • Phantom Power Protection: Yes
  • Networking
  • Network Interface: 10/100 Mbps, 1 Gbps, Dante Digital Audio
  • Network Addressing Capability:    DHCP or Manual IP address
  • Maximum Ethernet Cable Length: 100 m (328 ft)
  • Cascade output
  • Connector Type: BNC
  •                               Note: For connection of one additional receiver in the same band
  • Configuration: Unbalanced, passiveImpedance50 Ω
  • Insertion Loss: 0 dB, typical
  • RF Input
  • Spurious Rejection: >80 dB, typical
  • Connector Type: BNC
  • Impedance: 50 Ω
  • Insertion Loss   0dB typical
  • Bias Voltage: 12–13.5 V DC, 150 mA maximum, per antenna, switchable on/off
  • RF Carrier Frequency: AD4Q=A: 470–636 MHz
  •                                       AD4Q=B: 606–810 MHz
  •                                       AD4Q=C: 750–960