Shure BETA 27 Side-Address Microphone
- Item # 1024878
- Model # Beta 27
Top Rated
The Shure BETA 27 side-address condenser microphone is precision engineered for professional sound reinforcement and project studio recording applications. The BETA 27 mic's flat frequency response an… Learn More
$419.00
In Stock & Ready to Ship
Ship to Store
2-7 business days
A large-diaphragm supercardioid condenser mic that greatly minimizes bleed from off-axis sound sources.
With the BETA 27 you can be sure you'll capture the sounds you want, not the noises you don't. Order now!
Features
- Supercardioid polar pattern specifically targets the sound source consistently with greatly minimized bleed from off-axis sound sources
- Tailored for superior transient response from a low-mass, 1" externally-biased, ultra-thin 24 Karat gold-layered Mylar diaphragm
- Flat, neutral frequency response for natural reproduction on stage or in the studio
- 3-position switchable low-frequency filter helps reduce unwanted background noise or counteract proximity effect for consistent, extended low-end
- -15dB switchable attenuator handles extremely high SPLs with ease
- Premium electronic components and gold-plated internal and external connectors
- Internal pop filter with three separate mesh layers reduces wind and breath noise
Technical Specification
Shure BETA 27 Side-Address Microphone
- Type: Condenser (externally biased)
- Frequency: Response: 20 to 20,000Hz
- Polar Pattern: Supercardioid
- Impedance: 160 ohm
- Sensitivity (at 1kHz, open circuit voltage): -37dBV/Pa, 1 Pascal=94dB SPL
- Maximum SPL (1kHz at 1% THD): 1,000 ohm load: 134dB (148dB, Pad on), 2,500 ohm load: 140dB (154dB, Pad on)
- Signal-to-Noise ratio (referenced at 94dB SPL at 1kHz): 85.5dB, S/N ratio is difference between 94dB SPL and equivalent SPL of self noise, A-weighted
- Dynamic range (at 1kHz): 1,000 ohm load: 125.5dB, 2,500 ohm load: 131.5dB
- Common Mode Rejection (20Hz to 20kHz): > 50dB
- Clipping Level (20Hz–20kHz at 1% THD): 1,000 ohm load: 2.0dBV, 2,500 ohm load: 8.5dBV, THD of microphone preamplifier when applied input signal is equivalent to cartridge output at specified SPL
- Self-Noise (typical, equivalent SPL, A-weighted): 8.5dB
- Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
- Switch Attenuator: -15dB
- Low Frequency Response: flat; –6dB/octave below 115 Hz; –18dB/octave below 80Hz
- Connector: Three-pin professional audio (XLR), male
- Power Requirements: 48VDC phantom, 5.6 mA
- Weight: 428 g (15.1 oz.)