Shure PGXD14/BETA98H Digital Wireless System with Beta 98H/C Mic

  • Item # 1100955
  • Model # PGXD14/BETA98H-X8
Top Rated

The PGXD14/Beta98H Digital Wireless System from Shure adds the clarity of 24-bit digital audio to the legacy of trusted Shure microphone options for wireless performance. This system includes the Beta… Learn More

$479.00

Reserve Now! This item is backordered but it is available to reserve now. You will not be charged until the item ships.

Ship to Store

2-7 business days

Mic-up horns and percussion instruments with this convenient, quality wireless mic system.

The PGXD14/Beta98H Digital Wireless System from Shure adds the clarity of 24-bit digital audio to the legacy of trusted Shure microphone options for wireless performance. This system includes the Beta 98H/C, a precision-engineered miniature cardioid condenser microphone with integrated clip and gooseneck for horn applications, as well as a PGXD1 bodypack transmitter, and a PGXD4 receiver.The Beta 98H/C is a premium cardioid condenser instrument microphone that clamps onto the bell of wind instruments or onto the rim of percussion instruments. The integrated gooseneck and ratcheting swivel joint allows the mic to be easily positioned and secured, and an isolation shockmount reduces the transmission of instrument 'key noise' and other mechanical noise. A gooseneck angle brace is included to provide better retention of the microphone placement during more active performances.The rugged PGXD1 bodypack transmitter easily clips onto a belt or guitar strap, and provides you with a 20Hz - 20kHz frequency range, up to 10 hours of continuous use on 2 standard AA batteries (not included), and 200' of wireless freedom. The PGXD4 receiver offers 24-bit/48kHz accurate sound, offers technology for incredibly accurate sound, auto frequency selection, and greater reliability thanks to its true digital diversity.

Features

PGXD1 Transmitter with WA302 Instrument Cable

  • Rugged, compact bodypack with belt clip and instrument cable
  • 20Hz - 20kHz frequency range captures every nuance of your tone
  • Power, mute, and battery status LED
  • Up to 10 hours of continuous use from 2 AA batteries
  • 200' (60m) operating range
  • 26dB of continuously adjustable gain to match variable input levels

PGXD4 Wireless Receiver

  • 24-bit / 48kHz digital technology for incredibly accurate sound
  • Automatic frequency selection locates a clear channel instantly
  • One-touch sync automatically syncs the transmitter and receiver
  • True digital diversity delivers rock-solid wireless signal reliability
  • Up to 5 systems can be used at once
  • 1.4" and XLR audio outputs
  • Included padded carrying case for portability and protection

Beta 98H/C

  • 1.6m hard-wired cable
  • Tailored frequency response for open, natural sound reproduction
  • Compact, lightweight construction provides a low degree of visibility
  • Interchangeable microphone cartridges are available:
  • RPM108 - Cardioid cartridge
  • RPM110 - Supercardioid cartridge

Technical Specification

Shure PGXD14/BETA98H Digital Wireless System with Beta 98H/C Mic

  • PGXD1 transmitter/strong>
  • Audio input level: +10 dBV maximum, at minimum gain setting -16 dBV maximum, at maximum gain
  • Gain adjustment range: 26dB
  • Input impedance: 1MÎ
  • RF Output Level: 10 mW maximum (dependent on applicable country regulations)
  • Dimensions (HxWxD): 108mm x 64mm x 19mm (4.25" x 2.50" x 0.75")
  • Weight: 128g (4.5oz.) without batteries
  • Housing: Molded polycarbonate case
  • Power requirements:
  • Battery Life: Up to 10 hours

PGXD4 receiver

  • Dimensions (HxWxD): 40mm x 181mm x 104mm (1.6" x 7.125" x 4.1")
  • Weight: 289g (10.2oz.)
  • Housing: ABS
  • Audio Output Level (ref. ±38kHz deviation, 1kHz tone): XLR connector (into 3000Î load): -2.5dBV 1/4" connector (into 10000Î load): +10 dBV
  • Impedance:
  • XLR: 50Î
  • 1/4": 50Î
  • Sensitivity: -102 dBm @ 10-5 BER
  • Image rejection: > 70dB, typical
  • XLR output:
  • Impedance balanced Pin 1: Ground (cable shield)
  • Pin 2: Audio
  • Pin 3: No Audio
  • Audio LED:
  • Red: 2dB below clip
  • Amber: 12dB below clip
  • Green: 50dB below clip
  • Power Requirements: 12-18 Vdc at 150 mA, supplied by external power supply
  • Pin Assignments: XLR: 1 = ground, 2 = hot, 3 = cold 6.35mm (1/4") TRS: Tip = audio, Ring = no audio, Sleeve = ground

Beta 98H/C

  • Type: Condenser (electret bias)
  • Frequency response: 20 to 20,000Hz
  • Polar pattern: Unidirectional (cardioid)
  • Output impedance: Rated at 150Î (actual)
  • Recommended minimum load impedance: 1 kÎ (May be used with loads as low as 150Î with reduced clipping level
  • Output Level (0 dB = 1 volt per Pascal):
  • Open Circuit Voltage: -56dB (1.6mV)
  • Output Clipping Level (at 1kHz, THD < 1%):
  • 2.5kÎ load: 11dBV (3.5V)
  • 1.0kÎ load: 3dBV (1.4 V)
  • Maximum SPL:
  • 2.5kÎ: 163dB
  • 1.0kÎ load: 155dB
  • Dynamic Range (maximum SPL to A-weighted noise level): 132dB (2.5kÎ load)
  • Signal-to-noise ratio: 63dB at 94dB SPL (IEC 651)
  • Polarity:
  • Positive pressure on microphone diaphragm produces positive voltage on pin 2 relative to pin 3 of preamplifier output connector
  • Recommended Operating Voltage: 11 to 52 Vdc Phantom
  • Environmental conditions: Operating temperatures: -7 C to 49 C (20 F to 120 F)
  • Storage temperatures: 29 C to +74 C (-20 F to 165 F)
  • Relative Humidity: 0 to 95%
  • Net Weight: Microphone w/cable and preamplifier: 156g (5.5oz.)