Shure PGXD2/SM86 Handheld Transmitter with SM86 Mic

  • Item # 1101234
  • Model # PGXD2/SM86=-X8

The PGXD2/SM86 Handheld Transmitter with SM86 Mic is designed to meet the needs of the traveling performer by pairing an industry-standard handheld condenser vocal microphone with an exceptional trans… Learn More

$269.00

Reserve Now! This item is backordered but it is available to reserve now. You will not be charged until the item ships.

Ship to Store

2-7 business days

Takes one of Shure's most popular condenser vocal mics and turns it into a wireless mic with a 200' operating range.

The PGXD2/SM86 Handheld Transmitter with SM86 Mic is designed to meet the needs of the traveling performer by pairing an industry-standard handheld condenser vocal microphone with an exceptional transmitter for use with Shure's PGXD Wireless System. The PGXD2 transmitter features automatic setup, a multi-function LED Indicator (power, lockout, mute, low battery), and provides you with 8 hours of continuous use on 2 AA batteries. It gives you and your microphone a generous 200' (60m) operating range without losing audio quality.The Shure SM86 is a unidirectional (cardioid) condenser vocal microphone for professional use in live performance. An extremely rugged microphone, the SM86 withstands the rigors of touring while delivering a clear, studio-quality sound. A cardioid pickup pattern isolates the main sound source while minimizing unwanted background noise. The built-in three-point shock mount minimizes handling noise, and a two-stage pop filter reduces wind and breath "pop" noise. Besides the SM86 microphone and PGXD2 handheld transmitter you also get a padded carrying case and a microphone clip.

Features

PGXD2 Handheld Transmitter PGXD2 Handheld Transmitter Power, mute, and battery status LED

  • Up to 9 hours of continuous use from 2 AA batteries
  • 200" (60m) operating range
  • 10dB of adjustable gain
  • Lockable interface prevents accidental setting changes
  • Rugged construction for reliable performance show after show

SM86 microphone

  • Condenser cartridge for studio quality sound
  • Tailored frequency response for a clear reproduction of vocals
  • Rugged construction withstands the rigors of touring sound
  • Cardioid polar pattern minimizes unwanted background noise
  • Excellent choice for stage monitors and personal monitors
  • Built-in three-point shock mount minimizes handling noise
  • Two-stage "pop" filter reduces wind and breath noise

Technical Specification

Shure PGXD2/SM86 Handheld Transmitter with SM86 Mic

PGX2 Handheld Transmitter

  • Audio Input Level:
  • +2 dBV maximum at “10dB position
  • “8 dBV maximum at 0dB position
  • Gain Adjustment Range: 10dB
  • RF Transmitter Output: 30 mW maximum (dependent on applicable country regulations)
  • Dimensions including SM58 cartridge: 254mm x 51mm dia. (10" x 2")
  • Weight: 290g (10.2oz.) without batteries
  • Housing: Molded PC/ABS handle and battery cup
  • Power Requirements: 2 AA size alkaline or rechargeable batteries
  • Battery Life: > 8 hours (alkaline)

SM86 microphone

  • Transducer Type: Condenser (electret bias)
  • Frequency Response: 50 to 18,000Hz
  • Polar Pattern: Cardioid
  • Output Impedance: 150? at 1 kHz
  • Recommended minimum load impedance: 600?
  • Sensitivity (at 1,000Hz):
  • Open Circuit Voltage: -50 dBV/Pa (3.15 mV)
  • (1 Pa = 94 dB SPL)
  • Output Clipping Level: 1000? Load at 1,000Hz: +3 dBV (1.41V)
  • Maximum SPL (at 1,000Hz): 1000 ? load (1% THD): 147 dB
  • Self-Noise: 23dB typical, A-weighted
  • Dynamic Range (1000 ?): 124dB (maximum SPL to A-weighted noise level
  • Signal-to-Noise Ratio: 71dB at 94dB SPL (IEC 651)*
  • *S/N ratio is difference between 94 dB SPL and equivalent SPL of self-noise A-weighted.
  • Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of the output connector
  • Power: Phantom Supply Requirement: 11 to 52 Vdc, positive at both pins 2 and 3
  • Current Drain: 5.2 mA
  • Connector: Three-pin (XLR) professional audio
  • Case: Dark gray enamel-painted steel with matte-finished silver colored steel grille
  • Net Weight: 278g (9.8oz)
  • Environmental Conditions
  • Operating: -18 to 60 C (0 to 135 F) (relative humidity >90%)
  • Storage: -29 to 74 C (-20 to 165 F) (relative humidity >80%)