Bring deeper low-frequency extension and networked DSP management to stereo, multichannel and immersive monitoring systems with the ADAM Audio Sub10 PRO 10" powered studio subwoofer. Its high-excursion 10" paper-cone woofer, front-firing FEA-optimized bass reflex port and 200W RMS Class D amplifier deliver a 22Hz–264Hz frequency response at -3dB, while balanced analog XLR/TRS and AES3 digital connections support professional monitor routing. ADAM Control, four-band parametric EQ, Sonarworks SoundID Reference integration and dedicated Stereo, LFE and Wide modes provide control over system alignment, room correction and bass management. For producers and engineers working with bass-heavy music, multichannel production or immersive formats, the Sub10 PRO provides deeper low-frequency extension and calibration flexibility for critical monitoring decisions.
High-Excursion Woofer Extends Low-Frequency Monitoring
The high-excursion 10" woofer uses a fiber-reinforced paper cone, elastic rubber surround and ferrite magnet system with demodulation rings to support extended movement while maintaining controlled response. A 200W RMS Class D amplifier drives the woofer, while DSP-managed limiting and protection help keep the driver and electronics within operating limits. The front-firing, front-ported MDF enclosure features an FEA-optimized port designed to reduce airflow turbulence, with additional cabinet bracing and a steel grille protecting the driver. Together, these components support low-frequency reproduction extending to 22Hz at -3dB.
Networked DSP Brings Calibration Into the Monitoring Chain
Ethernet connectivity links the Sub10 PRO with ADAM Control, providing remote access to level, phase, delay and four bands of parametric EQ alongside compatible A Series monitors. The onboard DSP can host calibration filters generated in Sonarworks SoundID Reference, allowing room-correction profiles to run directly on the subwoofer after calibration. Firmware updates are also managed through ADAM Control, keeping system configuration and maintenance centralized across networked ADAM Audio monitoring systems.
Analog, AES3 and Immersive Modes Expand Routing Options
Dual XLR/TRS analog inputs, dual XLR outputs and AES3 digital input and output support conventional studio wiring and digital monitor chains at up to 24-bit/96kHz. Stereo mode handles standard 2.1 monitoring, dedicated LFE mode applies a 120Hz cutoff for immersive workflows such as Dolby Atmos, and Wide mode allows full-range subwoofer operation when bass management is handled elsewhere. Selectable crossover and phase settings, along with footswitch bass-management bypass, help engineers integrate and audition the ADAM Audio Sub10 PRO 10" powered studio subwoofer across stereo and multichannel monitoring systems.