Item #1530182 Model #9935-72788-00

Avid Pro Tools | HDX Thunderbolt 3 Omni Desktop System Standard

Sorry, this item is not available.

A versatile, all-in-one bundle featuring Pro Tools | HDX and Pro Tools | HD OMNI.

Outfit your studio easily with this powerful Avid Pro Tools | HDX Thunderbolt desktop bundle featuring a Pro Tools | HD OMNI interface. This fully assembled and ready-to-go bundle includes a Pro Tools | HDX Thunderbolt 3 Chassis, one HDX card, Pro Tools | Ultimate software and a Pro Tools | HD OMNI interface. Plus, you’ll get over 70AAX DSP plug-ins and a 1-year Software Updates + Support Plan included with Pro Tools | Ultimate. It also comes with Avid Pro Pro Tools | Ultimate Perpetual License.

Avid Pro Tools | HD OMNI is an all-in-one professional preamp, I/O and monitoring interface.. Capture pristine, high-resolution audio through premium mic preamps, connect your gear to a wide array of analog and digital I/O, and monitor your sessions in up to 7.1 surround with ultra-low latency all in one compact, cost-effective interface.

Track, mix and monitor in one

No need to route signals through multiple interfaces with HD OMNI, you can do everything in one single-space rack, so you save money and space. As the hub of any music studio, you can use HD OMNI to record high-quality instrument and vocal performances, while providing dedicated cue mixes for artists, and monitor the performance through a discrete mix. For post production, not only do you have overdub and Foley recording capabilities at your disposal, you can use HD OMNI to monitor mixes with up to 7.1 channels and fold down mixes from 7.1 to almost any channel configuration subset.

Hear what you’ve been missing

Raising the bar on audio performance, HD OMNI features premium A/D and D/A converters, so you can achieve higher audio fidelity, extensive dynamic range, super-low jitter. and the absolute lowest possible latency in your sessions. You also get built-in sample rate conversion and a soft clip feature for worry-free performance. And using Curv, a new built-in soft-knee limiter that catches even the fastest transients, you can track hotter signals and be assured that any unexpected peaks in your input wont put you in the red.

Full monitoring flexibility

Whether you want to listen in stereo or surround, monitor sound personally or set up a personal mix for someone else, or hear your work in headphones or on the big speakers, you can do it all with HD OMNI. Mix and monitor up to 7.1 surround (with fold down to stereo). Hear how your mix sounds on different speakers using the Main and ALT speaker selections. Set up an integrated cue mix for artists to monitor. Or isolate yourself with your own headphone mix. And if you don't feel like launching Pro Tools or even turning on your computer HD OMNI features a built-in, customizable, 14-input persistent monitor mixer, so you can continue to monitor external sources, such as keyboards, drum machines, and digital music players, independently from your recording setup.

Work with Pro Tools and more

HD OMNI completely integrates with Pro Tools | HDX, so you get maximum performance, dependability and control of your inputs, outputs, routing, and monitoring right from your Pro Tools software interface. You'll also get higher production quality and greater workflow flexibility than with previous Pro Tools interfaces. And if you want to use your interface and Pro Tools | HD hardware with other DAW software, you can do that too, as all Pro Tools | HD systems support Core Audio and ASIO drivers.
Specifications
  • PRO TOOLS | HD OMNI
  • Analog Inputs: 4
  • Analog Outputs: 8
  • Mic/Instrument Inputs: 4 (2 simultaneous inputs at a time)
  • Mic Pre Gain: 65dB
  • Headphone Output: 1
  • Monitoring Formats: 7.1, 7.0, 6.1, 6.0, 5.1, 5.0, QUAD, LCRS, LCR, 2.1, Stereo, Mono
  • Speaker Selection: 2 sets
  • Persistent Mixer: 14 input channels to 2 multichannel monitoring paths, each with its own fold-down configuration
  • AES/EBU I/O: 2—8
  • AES Single-Wire (192kHz): Yes
  • S/PDIF I/O: 2
  • ADAT I/O: 8
  • AES/EBU I/O: 2—8
  • AES Single-Wire (192kHz): Yes
  • S/PDIF I/O: 2
  • ADAT I/O: 8
  • S/MUX, S/MUX II and IV
  • SRC S/PDIF I/O
  • Word Clock I/O: 1 In + 1 Out
  • Loop Sync I/O: 1 In + 1 Out
  • Curv: Yes
  • Soft Clip: Yes
  • Digital Interface: DigiLink Mini
  • Chassis: 1U rack-mountable chassis
  • Mic Inputs
    • Frequency Response: 20Hz–20kHz (± .05dB)
    • Gain Range: 65dB
    • EIN: -128dB
    • THD+N: -107dB (0.00045%)
    • CMRR: -93dB
    Line Inputs
    • Frequency Response: 20Hz–20kHz (± .03dB)
    • Dynamic Range: 118dB (A-weighted)
    • THD+N: -111dB (0.00028%)
    Line Outputs
    • Frequency Response: 20Hz–20kHz (± .03dB)
    • Dynamic Range: 120dB (A-weighted)
    • THD+N: -108dB (0.00039%)
    • Line Output Level / Trim: +10dBu or +24dBu/-40dB to +10dB (0.1dB steps)
    Headphone Outputs
    • Frequency Response: 20Hz–20kHz (± .03dB)
    • Dynamic Range: 118dB (A-weighted)
    • THD+N: -107dB (0.00045%)
    • PRO TOOLS | HDX
    System Requirements

    • Mac OS X
    • Computer: Apple Mac Pro (Nehalem/Westmere models only)
    • OS: (32 or 64-bit) Mac OS X Lion
    • Memory: 4GB of RAM (8GB or more recommended)
    • Minimum 15GB free hard disk space for installation
    • USB port for iLok authorization (iLok included)
    • Windows
    • Computer: HP Z800 series computer
    • OS: (32 or 64-bit) Windows 7 Home Premium, Professional, or Ultimate (with Service Pack 1)
    • Memory: 4GB of RAM (8GB or more recommended)
    • Minimum 15GB free hard disk space for installation
    • USB port for iLok authorization (iLok 2 key included)
    In The Box
    • HDX Card
    • TDM Flex Cable
    • Power cable for HDX Card
    • Registration Card

    Features

    • Pristine audio clarity and ultra-low latency through state-of- the-art A/D and D/A conversion
    • High-quality, low-noise analog I/O:
    • 2 Premium, digitally controlled mic/DI preamps
    • 4 Line inputs
    • 8 Line outputs, with true analog gain
    • Versatile digital I/O, with sample rate conversion on all inputs:
    • 8 Channels of ADAT I/O (supports S/MUX II and IV)
    • 4 Line inputs
    • 8 Line outputs, with true analog gain
    • Supports 4x8 analog audio streams, or 8x8 including digital
    • Route audio independently from Pro Tools with the 14-input persistent monitor mixer
    • Completely integrates with Pro Tools|HD for full routing, mixing, and monitoring control
    • Track hotter signals and smooth out sounds with Curv, a new built-in soft-knee limiter
    • Hear your mixes in however many channels you need, from stereo to 7.1 surround
    • Improve communication while tracking with dedicated cue path
    • Keep things in sync with dedicated Word Clock and Loop Sync I/O
    • Compact 1U rack-mountable chassis
    • Connects to Pro Tools|HD through a DigiLink Mini connection (cable and adaptor included)