dbx ZonePRO 641 m Speaker Processor

  • Item # 1116140
  • Model # DBX-641MVVM

The ZonePRO 641m offers fixed I/O, pre-configured architecture, configurable insert processing and optional duplication of audio channels to another ZonePRO device via a link bus.The 641m features a t… Learn More

$555.00

Reserve Now! This item is backordered but it is available to reserve now. You will not be charged until the item ships.

Ship to Store

2-7 business days

6x4 digital zone processor.

The ZonePRO 641m offers fixed I/O, pre-configured architecture, configurable insert processing and optional duplication of audio channels to another ZonePRO device via a link bus.The 641m features a total of six inputs and four outputs. Inputs include four balanced mic/line switchable terminal block inputs and two mono-summed pairs of unbalanced RCA inputs. Hardware-controlled microphone gain allows adjustment of microphone gain per channel.The 641m device has a pre-configured architecture with input processing, a central matrix and output processing. Two input insert positions and one output insert position allow channel-specific insert processing to be configured. AutoWarmth, a psychoacoustic function that maintains full frequency bandwidth even when the signal level has dropped, is permanently available on each output zone.A link bus allows duplication of the first six audio channels to another ZonePRO device in applications where additional output zones are required.The front panel of the 641m features a power status LED, a network traffic LED, and an RS-232 control port.Additional system control is offered in the form of optional Zone Controllers. This collection of hardware wall-controllers represents a series of simple, elegant user interfaces for functions such as volume, source and preset control.All ZonePRO devices can be controlled by third party control systems via RS-232 or Ethernet as applicable (see table for further information). ZonePRO Designer-the configuration, control and monitoring software for the ZonePRO family of devices-offers control of the ZonePRO 641m via Ethernet or RS-232. The Configuration Wizard within ZonePRO Designer guides users through the step-by-step configuration process of the 641m. Call or click to order today!

Features

  • 6 Inputs / 4 Outputs
  • 4 Balanced Mic/Line Inputs
  • 2 Unbalanced, Mono-Summed RCA Input Pairs
  • Microphone Gain per Channel
  • Pre-Configured Architecture
  • Two Configurable Input Insert Positions
  • One Configurable Output Insert Position
  • AutoWarmth per Output Zone
  • Link Bus
  • Optional ZC Controllers
  • Ethernet Control
  • Serial Control
  • Third Party Control
  • Wizard-Driven Configuration

Technical Specification

dbx ZonePRO 641 m Speaker Processor

Indicators Network Traffic, Power

Input 6 Total (4) Switchable Mic or Line, (2) Unbalanced, Mono-Summed RCA Input Pairs

Input Connectors Euroblock (Line and Mic) RCA (Source)

Input Type Electronically balanced/RF-filtered

Input Impedance Euroblock: >50kÎ Balanced, >25kÎ Unbalanced, RF Filtered; RCA: >25kÎ Unbalanced, RF Filtered

Max Input +20dBu Mic/Line, +12dBu RCA

CMRR >40dB, typically >55dB @ 1 kHz

Mic Preamp gain 30 to 60dB

Mic Preamp Equivalent Input Noise (EIN) < -118dBu, 22Hz-22kHz, 150Î Source Impedance

Mic Preamp Phantom Power +15VDC

Output 4 total

Output Connectors Euroblock

Output Type Electronically Balanced, RF Filtered

Output Impedance 120Î Balanced, 60Î Unbalanced

Max Output +20dBu

A/D Converter dbx Type IV conversion system

A/D Dynamic Range (line) >113 dB, A-weighted, >110 dB unweighted

Type IV Dynamic Range >119dB, A-weighted, 22kHz; BW: >117dB, unweighted, 22kHz BW

Digital Output Dynamic Range >114 dB A-weighted, 110dB unweighted

Sample Rate 48kHz

D/A Dynamic Range 112 dB A-weighted, 109dB unweighted, 22kHz BW

Dynamic Range >109 dB A-weighted, >106 dB unweighted, 22kHz BW

THD+Noise 0.003% typical at +4dBu, 1kHz, 0dB gain

Frequency Response 20Hz - 20kHz, +/-0.5dB

Interchannel Crosstalk >80dB typical

Propagation Delay 0.6 msec

Operating Voltage 100VAC 50/60Hz, 120VAC 60Hz and 230VAC 50/60Hz

Power Consumption 29 W

BTU <92.13

Unit Weight 6.05 lbs / 2.74 kg

Shipping Weight 8.2 lbs / 4 kg

Dimensions 1.75" (1U) x 19" x 7.75" (45mm x 483mm x 197mm)

Safety Agency Certifications UL 600065, IEC 60065, EN 55013, E60065