Item #1582646 Model #IMMERSE

Neunaber Immerse Reverberator Mk II Stereo Reverb Effects Pedal Black


In Stock
Pickup In-Store
Save to Wishlist

Eight stellar stereo reverbs—zero learning curve.

The Neunaber Immerse Reverberator Mk II stereo reverb pedal raises the bar with eight rich stereo reverbs in one easy to use unit. No user manual is required. Experience studio-quality tone that can be used with instruments of all stripes.

Connect stereo outputs for a huge, immersive sounding reverb. Want to change it up and plug into a single amp? Immerse will sum a stereo input to mono with only output 1 connected. Your dry signal remains analog for low noise and zero latency. Use a standard 9V or 12V pedal power supply (sold separately). Or, connect the Immerse Reverberator MkII to a 100mA output on a brick supply.
  • Input level: Instrument/consumer line level
  • Input impedance: 1 mohm
  • Frequency response: 20Hz–30kHz
  • Total harmonic distortion: < 0.01%
  • Input: 9–12V DC, 100mA
  • Connector: Center-negative, 5.5 mm OD x 2.1 mm ID
  • Dimensions: 2.6" x 4.6" x 1.9" (63 mm x 115 mm x 46 mm)
  • Weight: 6.7 oz. (190 g)


  • High-quality buffered bypass, perfect for placing at the end of the signal chain
  • Trails switch
  • Kill Dry switch for parallel effect loops
  • Inputs/outputs can be used mono (#1) or stereo (#1 and #2)
  • Analog dry signal for low noise and zero latency
  • Small, pedalboard-friendly footprint
  • Requires standard 9V pedal power supply (not included)
  • Designed and manufactured in California