Radial Engineering StageBug SB-6 Passive Stereo Line Isolator

  • Item # 1505774
  • Model # R800-0160-00

The SB-6 helps remove noise from two channel audio systems, stereo guitar racks, and pedalboards. Two on-board isolation transformers provide a flat frequency response from 20Hz to 20kHz, while removi… Learn More

$109.99

Availability: Order Now!

Ship to Store

2-7 business days

Two-channel passive audio isolator that accommodates balanced or unbalanced signals.

The SB-6 helps remove noise from two channel audio systems, stereo guitar racks, and pedalboards. Two on-board isolation transformers provide a flat frequency response from 20Hz to 20kHz, while removing hum and buzz from ground loops. Dual ground lift switches help further reduce noise, and a -15dB pad allows you to handle high volume outputs without distortion. When using the SB-6 before a set of powered speakers or guitar amplifiers, a polarity reverse switch corrects frequency cancellation and ensures both speakers play back in phase with one another. The SB-6 is completely passive with no need for power, so it's easy to insert into any system to remove noise quickly. Eliminates noise when used with instruments, consumer electronics or line-level devices.

Features

  • Isolator for balanced and unbalanced signals
  • Eliminates hum and buzz caused by ground loops
  • Exceptionally linear from 20Hz to 20kHz
  • Automatically configures for hi-Z or lo-Z signal chains

Technical Specification

Radial Engineering StageBug SB-6 Passive Stereo Line Isolator

  • Audio circuit type: Passive Transformers
  • Transformer: Eclipse Custom
  • Frequency response: 20Hz-20KHz +/-1db
  • Dynamic range: >140db
  • Gain: -2dB
  • Total harmonic distortion: <0.0008% @ 1kHz
  • Phase Deviation: >5° @ 30Hz
  • Input Impedance: Varies with Load/47K
  • Output Impedance: 600Ω
  • Maximum Input: >+25dBu

Features

  • Input pad, 180° polarity reverse, Ground lift
  • Input Connectors: 1/4" TRS
  • Output Connectors: 1/4" TRS

General

  • Construction: 14 gauge steel chassis & outer shell
  • Size (L x W x D): 3.92" x 2.54" x 1.7" (100mm x 65mm x 43mm)
  • Weight: 0.9 lbs (408 grams)
  • Shipping size (L x W x D): 8" x 5" x 3" (203mm x 127mm x 76mm)
  • Shipping weight: 1.0 lb. (453 grams)
  • Power: Passive, no power required
  • Conditions: For use in dry locations only between 5°C and 40°C