Audio-Technica AT4041SP Studio Microphone Pack

  • Item # 1010098
  • Model # AT4041SP

The Audio-Technica AT4041SP Studio Pack offers you a pair of AT4041 studio condenser microphones. Engineered to meet the most critical acoustic requirements of professional recording, broadcast and li… Learn More

$499.00

Reserve Now! This item is backordered but it is available to reserve now. You will not be charged until the item ships.

Ship to Store

2-7 business days

Two small-diaphragm condensers for drum overheads, cymbals, and acoustic guitar recording.

Features

AT4041SP Studio Pack includes:

  • Two AT4041 cardioid condenser microphones
  • Two AT8405a stand clamps
  • Two AT8159 windscreens
  • Protective vinyl storage case

About the AT4041 cardioid condenser microphone:

  • Smooth, extended frequency response with a slight rise occurring in the high-frequency region
  • Ideal for drum overheads, acoustic guitar, piano, horns and under snare
  • Low-mass diaphragm improves transient response, increases response bandwidth and reduces handling and mechanical noise transfer
  • Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
  • State of the art design and manufacturing techniques ensure compliance with A-T's stringent consistency and reliability standards
  • Switchable hi-pass filter and rugged turned-brass microphone housing

Technical Specification

Audio-Technica AT4041SP Studio Microphone Pack

AT4041 Cardioid Condenser Mic:

  • Element: fixed-charge back plate, permanently polarized condenser
  • Polar pattern: cardioid
  • Frequency response: 20-20,000Hz
  • Low frequency roll-off: 80Hz, 12dB/octave
  • Open circuit sensitivity: -36dB (15.8 mV), re 1V at 1 Pa
  • Impedance: 100 ohms 
  • Maximum input sound level: 145dB SPL, 1kHz at 1% T.H.D.
  • Dynamic range (typical): 121dB, 1kHz at Max SPL
  • Signal-to-noise ratio: 70 DB, 1kHz at 1 Pa
  • Phantom Power requirements: 48V DC, 3.2 mA typical
  • Switch: flat, roll-off
  • Weight: 4.2oz. (120g)
  • Dimensions: 6.28" (159.5mm) long,
  • 0.83" (21.0mm) body diameter
  • Output connector: integral 3-pin XLRM-type
  • Accessories furnished: AT8405A stand clamp for 5/8"-27 threaded stands; at8159 Windscreen; protective carrying case
  • Audio-technica case style: S1