Item #1517047 Model #MX202W-A/C

Shure MX202 MicroFlex Condenser Microphone With Inline Preamp Bright White Cardioid


Out of stock
Pickup In-Store

This item is backordered but it is available to reserve now. You will not be charged until the item ships.

Email me when in stock

Save to Wishlist

Accurate sound reproduction in an unobtrusive overhead microphone.

The MX202 MicroFlex condenser microphone captures Shure quality sound in a compact, adjustable package. The MX202 features a condenser microphone cartridge attached to a flexible, 4" gooseneck with a 30' cable. The inline preamp offers easy microphone stand or ceiling installation, and when combined with the high-sensitivity cartridge's wide frequency response, this microphone provides accurate sound reproduction with a minimum of RF interference or electromagnetic hum. The MX202 MicroFlex includes a mic stand adapter and requires phantom power.

It's also available with a plate-mounted preamp (see product #270396). 
Frequency Response
  • 50Hz–17kHz
Output Impedance
  • 180 ohms actual (EIA rated at 150 ohms)
  • Sensitivity (At 1,000 Hz, open circuit voltage*)
  • Cardioid: -35.0 dBV/Pa (17.8 mV)
  • Supercardioid: -33.5 dBV/Pa (21.1 mV)
  • All values -12dB at 0 gain; *1 Pascal = 94dB SPL
  • Maximum SPL (1kHz at 1% THD, 1 kohm load)
  • Cardioid: 124.2dB
  • Supercardioid: 122.7dB
  • All values +6dB at 0 gain
Equivalent Output Noise (A-weighted)
  • Cardioid: 28dB SPL
  • Supercardioid: 26.5dB SPL
Signal to Noise Ratio (referenced at 94dB SPL)
  • Cardioid: 66dB
  • Supercardioid: 67.5dB
Dynamic Range at 1 kohm load
  • 96.2dB
  • 100dB at 0 gain
Common Mode Rejection
  • 45dB minimum
Preamplifier Output Clipping Level (1% THD)
  • -6.0 dBV (0.5 V)
  • -12 dBV at 0 gain
  • Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output connector
Power Requirements
  • 11 to 52 Vdc phantom, 2.0 mA
Environmental Requirements
  • Operating Temperature Range: -18 to 57 degrees ºC (0 to 135 degrees ºF)
Relative Humidity
  • 0 to 95%
Cable Length
  • 9 m (30')


  • Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
  • Balanced, transformerless output for increased immunity to noise over long cable runs
  • Supplied stand-mount adapter for portable applications