Item #1535700 Model #SLXD14-J52

Shure SLXD14 Combo System with SLXD1 Bodypack and SLXD4 Receiver Band J52

$649.00

Availability
Delivery
Out of stock
Pickup In-Store

This item is backordered but it is available to reserve now. You will not be charged until the item ships.

Email me when in stock

Save to Wishlist

Easy setup and optimum performance in one package.

SLX® Wireless Systems are powerful wireless tools that can be set up quickly and used confidently by installers and working bands. Features include auto frequency scan with transmitter setup, exceptional wireless clarity, and Shure patented Audio Reference Companding.

Includes WL93 lavalier microphone, SLX1 bodypack transmitter, SLX4 receiver, tie clip, rackmount kit, two 1/4 wave antennas, power supply, 2 AA batteries, protective bumpers with 8 screws, vinyl bag, and user guide.
Specifications
SLX Working Range:
  • Line of Sight: 
  • 100 m (300 ft) 
  • Note: Actual range depends on RF signal absorption,reflection and interference.
Audio Frequency Response:
  • 45–15000 Hz 
  • Note: Dependent on microphone type
Total Harmonic Distortion:
  • Ref. ±38 kHz deviation with 1 kHz tone 
  • <0.5%, typical
Dynamic Range:
  • >100 dB, A-weighted
Operating Temperature Range:
  • -18°C (0°F) to +50°C (122°F) 
  • Note: Battery characteristics may limit this range.
Transmitter Audio Polarity:
  • Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low-impedance output) and the tip of the high impedance 1/4-inch output.
SLX1 Audio Input Level:
  • Gain position 
  • mic: −10 dBV maximum 
  • 0dB: +10 dBV maximum 
  • –10dB: +20 dBV maximum
Gain Adjustment Range:
  • 30 dB
Input Impedance:
  • 1 MΩ
RF Output Power:
  • 10–30 mW 
  • varies by region
Pin Assignments:
  • TA4M: 
  • 1: ground (cable shield) 
  • 2: + 5 V Bias 
  • 3: audio 
  • 4: Tied through active load to ground (On instrument adapter cable, pin 4 floats)
Dimensions: 
  • 108mm x 64mm x 19mm (H x W x D)
Weight:
  • 81 g (3 oz.), without batteries
Housing: 
  • galvanized steel
Power Requirements:
  • 2 "AA" size alkaline or rechargeable batteries
Battery Life:
  • up to 8 hours (alkaline)
SLX4 Dimensions:
  • 42mm X 197mm X 134mm (H x W x D) Weight: 
  • 816 g (1 lb 13oz.)
Housing:
  • galvanized steel
Sensitivity:
  • -105 dBm for 12 dB SINAD, typical
Power Requirements:
  • 12–18 V DC @ 150 mA, supplied by external power supply (tip positive)
Configuration:
  • Impedance balanced
Maximum Audio Output Level:
  • Ref. ±38 kHz deviation with 1 kHz tone 
XLR connector:
  • –13 dBV (into 600 Ωload) 
  • 6.35 mm (1/4") 
  • connector: –2 dBV (into 3 kΩ load)
Impedance:
  • XLR connector: 200 Ω 
  • 6.35 mm (1/4") 
connector: 1 kΩ Pin Assignments
  • XLR connector: 1=ground, 2=audio, 
  • 3=no audio 
6.35 mm (1/4"") connector: 
  • Tip=audio, Ring=no audio, Sleeve=ground Image Rejection 
  • >70 dB, typical Volume Adjustment Range
  • 0 dB to -25 dB "

Features

  • 1 - rackmount kit
  • 2 - 1/4 wave antennas
  • 1 - power supply
  • 2 - AA battery
  • 1 - vinyl bag
  • protective bumpers with 8 screws
warning

WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov.